Samsung SCX-5935NX Quick Guide Easy Manual Ver.1.0 (English) - Page 30
Network setup, Network environment, Introducing useful network programs, Configuring TCP/IP - service manual
View all Samsung SCX-5935NX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
network setup 9. This chapter gives you step-by-step instructions for setting up the network connected machine and software. This chapter includes: • Network environment • Introducing useful network programs • Configuring TCP/IP • Installing network connected machine's driver NETWORK ENVIRONMENT You can use network after connecting network cable to a corresponding port on your machine. You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic network settings through the machine's control panel. The following table shows the network environments supported by the machine: ITEM REQUIREMENTS Network interface Ethernet 10/100 Base-TX Network operating system • • • • Novell NetWare 5.x, 6.x (TCP/IP Only) Windows 2000/XP/2003/2008/Vista/7/2008 Server R2 Various Linux OS Mac OS X 10.3 ~ 10.6 Network protocols • TCP/IP on Windows • IPP • DHCP • SNMP • BOOTP If you want to setup DHCP network protocol, go to the http://developer.apple.com/networking/bonjour/download/, select the program Bonjour for Windows due to your computer operating system, and install the program. This program will allow you to fix the network parameter automatically. Follow the instruction in the installation window. This program does not support Linux. INTRODUCING USEFUL NETWORK PROGRAMS There are several programs available to setup the network settings easily in network environment. For the network administrator especially, managing several machines on the network is possible. SyncThru™ Web Service Web server embedded on your network machine server. If you login with administrator's ID and password on the web server, it allows you to: • Configure the network parameters necessary for the machine to connect to various network environments. • Customize machine settings. (See "Using SyncThru™ Web Service" on page 93.) SyncThru™ Web Admin Service Web-based machine management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. Download this program from http://solution.samsungprinter.com. SetIP This utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol. (See "Using SetIP Program" on page 95.) CONFIGURING TCP/IP When you connect your machine to a network, you must first configure the TCP/IP settings for the machine. After you have assigned and verified the TCP/IP settings, you are ready to install the software on each computer on the network. Setting the network address Contact the network administrator if you are not sure how to configure. You can set up TCP/IP network parameters, follow the steps below: 1. Connect your machine to the network with an RJ-45 Ethernet cable. 2. Turned on the machine. 3. Press Machine Setup on the control panel. 4. Press Admin Setting. 5. When the login message appears, enter password. Touch the password input area, then the question marks appears. Use the number keypad on the control panel to enter the password. Once the password is entered, press OK. (Factory setting:1111) 6. Press the Setup tab > Network Setup. 7. Select TCP/IP Protocol. 8. Press IP Setting. 9. Select Static and then enter IP Address, Subnet Mask and Gateway address fields. Touch the input area, then enter addresses by number keypad on the control panel. 10. Press OK. Network setup_ 30