Samsung SCX-5935NX Quick Guide Easy Manual Ver.1.0 (English) - Page 65
Receiving a fax, Receiving automatically in Answering Machine/Fax
View all Samsung SCX-5935NX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
1. Press Machine Setup on the control panel. 2. Press Admin Setting. When the login message pops up, enter password and press OK. (See "Setting the authentication password" on page 33.) 3. Press the Setup tab > Fax Setup. 4. Press down arrow on the right side to move down. 5. Press Send Batch. 6. Press On. 7. Press OK. When you send a fax, if a fax number is same as the number in delay fax, the machine asks whether you want to add more documents to reserved delay fax. Sending a priority fax This function is used when a high priority fax need to be sent ahead of reserved operations. The original is scanned into memory and immediately transmitted when the current operation is finished. In addition, priority transmission will interrupt a sending to multiple destinations between stations (example, when the transmission to station A ends, before transmission to station B begins) or between redial attempts. 1. Press Fax from the main screen. 2. Place the originals face up in the document feeder. 3. Adjust the document settings in the Image tab and the Basic tab. 4. Press the Advanced tab > Priority Send. 5. Press On. 6. Press OK. 7. Press Start to start the urgent fax job. RECEIVING A FAX This part explains how to receive a fax, and the special receiving methods available. Changing the receive modes Your machine is preset to Fax mode at the factory. When you receive a fax, the machine answers the call on a specified number of rings and automatically receives the fax. But if you want to change the Fax mode to another mode, follow the steps below: 1. Press Machine Setup on the control panel. 2. Select Admin Setting. When the login message pops up, then enter password and press OK. (See "Setting the authentication password" on page 33.) 3. Press the Setup tab > Fax Setup > Fax Initial Setup > Receive Mode. 4. Select the option. • Telephone: Receives a fax by pressing On Hook Dial and then Start. • Fax: Answers an incoming fax call and immediately goes into the fax reception mode. • Answering Machine/Fax: Is for when an answering machine attached to your machine. Your machine answers an incoming call, and the caller can leave a message on the answering machine. If the fax machine senses a fax tone on the line, the machine automatically switches to Fax mode to receive the fax. 5. Press OK. When the memory is full, the machine can no longer receive any incoming fax. Secure free memory to resume by removing data stored in the memory. Receiving manually in Telephone mode You can receive a fax call by pressing On Hook Dial and then pressing Start when you hear a fax tone from the remote machine. The machine begins receiving a fax. Receiving automatically in Answering Machine/Fax mode To use this mode, you must attache an answering machine to the EXT socket on the back of your machine. (See "Rear view" on page 20.) If the caller leaves a message, the answering machine stores the message as it would normally. If your machine detects a fax tone on the line, it automatically starts to receive the fax. • If you have set your machine to this mode and your answering machine is switched off, or no answering machine is connected to EXT socket, your machine automatically goes into Fax mode after a predefined number of rings. • If your answering machine has a user-selectable ring counter, set the machine to answer incoming calls within 1 ring. • If you are in Telephone mode when the answering machine is connected to your machine, you must switch off the answering machine. otherwise, the outgoing message from the answering machine will interrupt your phone conversation. Receiving faxes manually using an extension telephone This feature works best when you are using an extension telephone connected to the EXT socket on the back of your machine. You can receive a fax from someone you are talking to on the extension telephone, without going to the fax machine. When you receive a call on the extension phone and hear fax tones, press the keys *9* on the extension phone. The machine receives the fax. Press the buttons slowly in sequence. If you still hear the fax tone from the remote machine, try pressing *9* once again. To change the *9* to, for example, *3*, follow the steps below: 1. Press Machine Setup on the control panel. 2. Select Admin Setting. When the login message pops up, then enter password and press OK. (See "Setting the authentication password" on page 33.) 3. Press the Setup tab > Fax Setup > Receive Start Code. 4. Select On. 5. Press left/right arrows to display number 3. 6. Press OK. Receiving in secure receiving mode You may need to prevent your received faxes from being accessed by unauthorized people. You can turn on secure receiving mode to restrict printing of received faxes when the machine is unattended. In secure receiving mode, all incoming faxes go into memory. To print the received fax data, enter passcode you have set for this feature. 1. Press Machine Setup on the control panel. 2. Select Admin Setting. When the login message pops up, then enter password and press OK. (See "Setting the authentication password" on page 33.) 3. Press the Setup tab > Fax Setup > Secure Receive. 4. Select On. 5. Enter passcode with 4 digit number using the number keypad on the control panel. Faxing_ 65