ZyXEL Vantage CNM User Guide - Page 122

Chapter 5 Device Network Settings Note: Be careful not to list your computer's MAC address and set the Action field to Deny Association when managing the device via a wireless connection. This would lock you out. Figure 48 Device Operation > Device Configuration > Network > Wireless Card > MAC Filter The following table describes the fields in this screen. Table 41 Device Operation > Device Configuration > Network > Wireless Card > MAC Filter LABEL DESCRIPTION Activate Select this to enable MAC address filtering. MAC Filter Filter Action Define the filter action for the list of MAC addresses in the MAC Address table. Select Deny Association to block access to the router, MAC addresses not listed will be allowed to access the device. Select Allow Association to permit access to the router, MAC addresses not listed will be denied access to the device. Index This is the index number of the MAC address. User Name Enter a descriptive name for the MAC address. MAC Address Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc of the wireless stations that are allowed or denied access to the device in these address fields. Apply Click this to save your changes back to the device. Reset Click this to begin configuring this screen afresh. 122 Vantage CNM User's Guide