ZyXEL Vantage CNM User Guide - Page 236
Remote MGMT
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Chapter 7 Device Advanced Settings Table 93 Device Operation > Device Configuration > Advanced > DNS > DHCP LABEL DESCRIPTION IP Select From ISP if your ISP dynamically assigns DNS server information (and the device's WAN IP address). Use the drop-down list box to select a DNS server IP address that the ISP assigns in the field to the right. Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. If you chose User-Defined, but leave the IP address set to 0.0.0.0, UserDefined changes to None after you click Apply. If you set a second choice to User-Defined, and enter the same IP address, the second User-Defined changes to None after you click Apply. Select DNS Relay to have the device act as a DNS proxy. The device's LAN, DMZ or WLAN IP address displays in the field to the right (read-only). The device tells the DHCP clients on the LAN, DMZ or WLAN that the device itself is the DNS server. When a computer on the LAN, DMZ or WLAN sends a DNS query to the device, the device forwards the query to the device's system DNS server (configured in the DNS System screen) and relays the response back to the computer. You can only select DNS Relay for one of the three servers; if you select DNS Relay for a second or third DNS server, that choice changes to None after you click Apply. Apply Reset Select None if you do not want to configure DNS servers. You must have another DHCP sever on your LAN, or else the computers must have their DNS server addresses manually configured. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. Click this to save your changes back to the device. Click this to begin configuring this screen afresh. 7.13 Remote MGMT This section shows you how to configure the Remote MGMT screens. These screens may vary depending on which model you're configuring. Please see the device's User's Guide for more information about any of these screens or fields. 7.14 Remote MGMT Use this screen to configure the device's remote management settings. To open this screen, click a device, click Device Operation and then click Device Configuration > Advanced > Remote Management in the navigation panel. 236 Vantage CNM User's Guide