ZyXEL Vantage CNM User Guide - Page 373

Chapter 14 Object 14.4.3 Address Group Add/Edit Screen The Address Group Add/Edit screen allows you to create a new address group or edit an existing one. To access this screen, go to the Address Group screen (see Section 14.4.2 on page 371), and click either the Add icon or an Edit icon. Figure 167 Device Operation > Device Configuration > Object > Address > Group > Add/Edit The following table describes the labels in this screen. Table 150 Device Operation > Device Configuration > Object > Address > Group > Add/Edit LABEL DESCRIPTION Group Name Enter a name for the address group. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. Description This field displays the description of each address group, if any. You can use up to 60 characters, punctuation marks, and spaces. Available This field displays the names of the address and address group objects that can be added to the address group. Member Apply Cancel Select address and address group objects that you want to be members of this group and click the select arrow to add them to the member list. This field displays the names of the address and address group objects that have been added to the address group. The order of members is not important. To remove members, select them and click the deselect arrow. Click Apply to save your changes back to the ZyWALL. Click Cancel to exit this screen without saving your changes. Vantage CNM User's Guide 373