ZyXEL Vantage CNM User Guide - Page 441

Chapter 17 Configuration Management Edit screen, the following screen appears. Use this menu item to create a service configuration building block. Figure 218 Device Operation > Configuration Management > Building Block > Configuration BB > Add/Edit (ZLD Service) > Create The following table describes the fields in this screen. Table 194 Device Operation > Configuration Management > Building Block > Configuration BB > Add/Edit (ZLD Service) > Create TYPE DESCRIPTION IP Protocol Select the protocol the service uses. Choices are: TCP, UDP, ICMP, and User Defined. Starting Port Ending Port This field appears if the IP Protocol is TCP or UDP. Specify the port number(s) used by this service. If you fill in one of these fields, the service uses that port. If you fill in both fields, the service uses the range of ports. ICMP Type This field appears if the IP Protocol is ICMP Type. Select the ICMP message used by this service. This field displays the message text, not the message number. IP Protocol Number This field appears if the IP Protocol is User Defined. Save&Exit Cancel Enter the number of the next-level protocol (IP protocol). Allowed values are 0 - 255. Click this to save your changes and back to the previous screen. Click this to exit this screen without saving your changes. 17.9 Component BB Use this menu item to manage component building blocks to the selected device. A component BB is a part of setting such as a myZyXEL.com account, an IP address, an IKE phase 1 or phase2 setting. To open this menu item, select the Vantage CNM User's Guide 441