ZyXEL Vantage CNM User Guide - Page 219
Address Mapping
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Chapter 7 Device Advanced Settings Table 80 Device Operation > Device Configuration > Advanced > NAT > Port Fowarding (continued) LABEL DESCRIPTION Port Translation (start/end) Enter the port number here to which you want the device to translate the incoming port. For a range of ports, you only need to enter the first number of the range to which you want the incoming ports translated, the device automatically calculates the last port of the translated port range. Server IP Address Type the IP address of the inside server. Apply Click this to save your changes back to the device. Reset Click this to begin configuring this screen afresh. 7.3 Address Mapping Use this screen to configure various types of network address translation (NAT) on the device. To open this screen, click a device, click Device Operation in the menu bar, and then click Device Configuration > Advanced > NAT > Address Mapping in the navigation panel. Figure 88 Device Operation > Device Configuration > Advanced > NAT > Address Mapping The following table describes the labels in this screen. Table 81 Device Operation > Device Configuration > Advanced > NAT > Address Mapping LABEL DESCRIPTION WAN Interface Select the WAN port to use the address mapping rules. # This is the number of an individual entry. Vantage CNM User's Guide 219