ZyXEL Vantage CNM User Guide - Page 389

Chapter 15 AAA Table 160 Device Operation > Device Configuration > Object > AAA Server > Active Directory (or LDAP) > Group > Add (continued) LABEL DESCRIPTION Bind DN Specify the bind DN for logging into the AD or LDAP server. Enter up to 127 alphanumerical characters. Password Base DN CN Identifier Search time limit For example, cn=zywallAdmin specifies zywallAdmin as the user name. If required, enter the password (up to 15 alphanumerical characters) for the ZyWALL to bind (or log in) to the AD or LDAP server. Specify the directory (up to 127 alphanumerical characters). For example, o=ZyXEL, c=US. Specify the unique common name that uniquely identifies a record in the AD or LDAP directory. Enter up to 127 alphanumerical characters. Specify the timeout period (between 1 and 300 seconds) before the ZyWALL disconnects from the AD or LDAP server. In this case, user authentication fails. Use SSL Host Members # Members Add icon Search timeout occurs when either the user information is not in the AD or LDAP server(s) or the AD or LDAP server(s) is down. Select Use SSL to establish a secure connection to the AD or LDAP server(s). The ordering of the LDAP servers is important as the ZyWALL uses the AD or LDAP servers for user authentication in the order they appear in this table. This field displays the index number. Specify the URI (Uniform Resource Identifier) of an AD or LDAP server. You can enter the IP address (in dotted decimal notation) or the fully qualified domain name (FQDN; up to 63 alphanumerical characters) of the AD or LDAP server. Click Add to add a new AD or LDAP server. You can add up to four AD or LDAP member servers. Total Records Apply Cancel Click Remove to remove an AD or LDAP server. This field displays the total number of host member entries. Click Apply to save the changes. Click Cancel to discard the changes. Vantage CNM User's Guide 389