ZyXEL Vantage CNM User Guide - Page 438

Chapter 17 Configuration Management Edit screen, the following screen appears. Use this menu item to create a user configuration building block. Figure 216 Device Operation > Configuration Management > Building Block > Configuration BB > Add/Edit (ZLD User) > Create The following table describes the fields in this screen. Table 192 Device Operation > Configuration Management > Building Block > Configuration BB > Add/Edit (ZLD User) > Create TYPE DESCRIPTION User Type Select what type of user this is. Choices are: Password • Admin - this user can look at and change the configuration of the ZyWALL • Limited-Admin - this user can look at the configuration of the ZyWALL but not to change it • User - this user has access to the ZyWALL's services but cannot look at the configuration • Guest - this user has access to the ZyWALL's services but cannot look at the configuration • Ext-User - this user account is maintained in a remote server, such as RADIUS or LDAP. This field is not available if you select the Ext-User user type. Retype Description Authentication Timeout Settings Enter the password of this user account. It can consist of 4 - 30 alphanumeric characters. This field is not available if you select the Ext-User user type. Enter the password again. Enter the description of each user, if any. You can use up to 60 printable ASCII characters. Default descriptions are provided. If you want to set authentication timeout to a value other than the default settings, select Use Manual Settings then fill your preferred values in the fields that follow. 438 Vantage CNM User's Guide