ZyXEL Vantage CNM User Guide - Page 563
Vantage CNM Server Public IP Address
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 563 highlights
Chapter 30 CNM System Setting Table 250 CNM System Setting > Configuration > Servers > Configuration LABEL DESCRIPTION Internal IP or Domain Name If your FTP server is in the same private network as the Vantage CNM server, select this and type the IP address or domain name of the FTP server. Vantage CNM will then use this IP address for uploading firmware files to managed devices. User Name Type your login name to this FTP server. Password Type the FTP server password associated with the login name. Mail Server The mail (SMTP) server is used to send Vantage CNM notifications. IP or Domain Name Type the IP address or the domain name of the mail server here. Mail Sender Type a name to identify the mail server. User Name Type your login name to this mail server. Password Type the mail server password associated with the login name. Apply Click this to save your settings in Vantage CNM. Reset Click this to begin configuring the screen afresh. 30.1.1 Vantage CNM Server Public IP Address If you change the Vantage CNM server public IP address, then each (Vantage CNM-registered) device's Manager IP address must change too. 1 Go to the CNM System Settings > Configuration > Servers > Configuration screen. 2 Enter the new IP address in the Public IP Address field and Apply. 3 Change all registered devices' manager IP address to the new IP address, you must access each device's web interface or command line. • For ZyNOS ZyWALL, go to ADVANCED > REMOTE MGMT > CNM tab in the web interface. Enter the new Vantage CNM public IP address and then click Apply. • For ZLD ZyWALL, go to System > Vantage CNM in the web interface. Enter the new Vantage CNM public IP address and then click Apply. • For Prestige, go to command line and enter cnm managerIp x.x.x.x on the ZyXEL device where x.x.x.x is the public IP address of the Vantage CNM server. 4 Restart managed devices or restart Vantage CNM (see 4a and 4b) to reset the communication between Vantage CNM and devices. Wait about 5 minutes until the device is ready and registers with Vantage CNM. You don't have to restart the computer on which Vantage CNM is installed. See how to restart Vantage CNM as following. Vantage CNM User's Guide 563