ZyXEL Vantage CNM User Guide - Page 158
Device Operation > Device Configuration > Security > VPN > VPN Rules, Manual > Add/
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Chapter 6 Device Security Settings Table 54 Device Operation > Device Configuration > Security > VPN > VPN Rules (Manual) > Add/Edit (continued) LABEL DESCRIPTION Name Type up to 32 characters to identify this VPN policy. You may use any character, including spaces, but the Vantage CNM drops trailing spaces. Allow NetBIOS Traffic Through IPSec Tunnel NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that enable a computer to find other computers. It may sometimes be necessary to allow NetBIOS packets to pass through VPN tunnels in order to allow local computers to find computers on the remote network and vice versa. Local / Remote Network Select this check box to send NetBIOS packets through the VPN connection. Local / Remote IP addresses must be static and correspond to the remote IPSec router's configured remote IP addresses. Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have the same local or remote IP address, but not both. You can configure multiple SAs between the same local and remote IP addresses, as long as only one is active at any time. Starting Address When the Address Type field is configured to Single, enter a (static) IP address on the LAN behind the device. When the Address Type field is configured to Range, enter the beginning (static) IP address, in a range of computers on the LAN behind the device. When the Address Type field is configured to Subnet, this is a (static) IP address on the LAN behind the device. Ending Address/Subnet Mask When the Address Type field is configured to Single, this field is N/A. When the Address Type field is configured to Range, enter the end (static) IP address, in a range of computers on the LAN behind the device. When the Address Type field is configured to Subnet, this is a subnet mask on the LAN behind the device. Gateway Policy Information My ZyWALL This is the IP address of the local and remote computer(s) of the VPN tunnel. Remote Gateway Address Type the IP address of the computer with which you will make the VPN connection or leave the field blank to have the device automatically use the address in the Secure Gateway field. Manual Proposal SPI Type a number (base 10) from 1 to 999999 for the Security Parameter Index. Encapsulation Mode Select Tunnel mode or Transport mode from the drop-down list box. 158 Vantage CNM User's Guide