ZyXEL Vantage CNM User Guide - Page 371
Address Group Summary Screen
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
Chapter 14 Object The following table describes the labels in this screen. Table 148 Device Operation > Device Configuration > Object > Address > Address > Add/Edit LABEL DESCRIPTION Name Type the name used to refer to the address. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. Address Type Select the type of address you want to create. Choices are: HOST, RANGE, SUBNET, INTERFACE IP, INTERFACE SUBNET, and INTERFACE GATEWAY. IP Address Starting IP Address Ending IP Address Network Netmask Interface Apply Cancel Note: The ZyWALL automatically updates address objects that are based on an interface's IP address, subnet, or gateway if the interface's IP address settings change. For example, if you change ge1's IP address, the ZyWALL automatically updates the corresponding interface-based, LAN subnet address object. This field is only available if the Address Type is HOST. This field cannot be blank. Enter the IP address that this address object represents. This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the beginning of the range of IP addresses that this address object represents. This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the end of the range of IP address that this address object represents. This field is only available if the Address Type is SUBNET, in which case this field cannot be blank. Enter the IP address of the network that this address object represents. This field is only available if the Address Type is SUBNET, in which case this field cannot be blank. Enter the subnet mask of the network that this address object represents. Use dotted decimal format. If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE GATEWAY as the Address Type, use this field to select the interface of the network that this address object represents. Click Apply to save your changes back to the ZyWALL. Click Cancel to exit this screen without saving your changes. 14.4.2 Address Group Summary Screen The Address Group screen provides a summary of all address groups. To access this screen, click Device Operation > Device Configuration > Object > Vantage CNM User's Guide 371