ZyXEL Vantage CNM User Guide - Page 68

Chapter 5 Device Network Settings Table 17 Device Operation > Device Configuration > Network > WAN > General (ZyNOS ZyWALL) (continued) LABEL DESCRIPTION Allow between WAN2 and LAN Select this check box to forward NetBIOS packets from the WAN2 port to the LAN port and from the LAN port to WAN2. If your firewall is enabled with the default policy set to block WAN port 2 to LAN traffic, you also need to enable the default WAN2 to LAN firewall rule that forwards NetBIOS traffic. Allow between WAN2 and DMZ Allow between WAN2 and WLAN Allow Trigger Dial Apply Reset Clear this check box to block all NetBIOS packets going from the WAN2 port to the LAN port and from LAN port to WAN2. Select this check box to forward NetBIOS packets from the WAN2 port to the DMZ port and from the DMZ port to WAN2. Clear this check box to block all NetBIOS packets going from the WAN2 port to the DMZ port and from DMZ port to WAN2. Select this check box to forward NetBIOS packets from the WAN2 port to the WLAN port and from the WLAN port to WAN2. Clear this check box to block all NetBIOS packets going from the WAN2 port to the WLAN port and from WLAN port to WAN2. Select this option to allow NetBIOS packets to initiate calls. Click this to save your changes back to the device. Click this to begin configuring this screen afresh. 68 Vantage CNM User's Guide