ZyXEL Vantage CNM User Guide - Page 448

Chapter 17 Configuration Management Table 198 Device Operation > Configuration Management > ZLD Firewall Rule Group Configuration > Add/Edit (continued) TYPE DESCRIPTION # This is the number of an individual entry. Device Name This field displays the name of ZLD-based ZyWALL(s) to which this rule applies. Source Address Use this field to select a source address setting to which the rule applies for the selected device. Select Keep Source Address in firewall rule to use the source address setting configured in the Firewall Rule section above. Destination Address Select Replace Source Address in firewall rule to display additional fields that you can customize for this device. See Section 14.4.1 on page 370 for similar field description. Use this field to select a destination address setting to which the rule applies for the selected device. Select Keep Destination Address in firewall rule to use the destination address setting configured in the Firewall Rule section above. Add icon Select Replace Destination Address in firewall rule to display additional fields that you can customize for this device. See Section 14.4.1 on page 370 for similar field description. This column provides icons to add, edit, and remove a device to which this firewall rule applies. To add a device, click the Add icon at the top of the column. Apply Cancel To delete an existing device, click the Remove icon next to the device. The Web Configurator confirms that you want to delete the group before doing so. Click this to save your changes back to the device. Click this to exit this screen without saving. 448 Vantage CNM User's Guide