ZyXEL Vantage CNM User Guide - Page 79
Device Operation > Device Configuration > Network > WAN > WAN1/2, ZyNOS ZyWALL with two
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 5 Device Network Settings Table 21 Device Operation > Device Configuration > Network > WAN > WAN1/2 (ZyNOS ZyWALL with two WAN ports) (continued) LABEL DESCRIPTION Service Type Choose from Standard, RR-Telstra (RoadRunner Telstra authentication method), RR-Manager (Roadrunner Manager authentication method), RR-Toshiba (Roadrunner Toshiba authentication method) or Telia Login. The following fields do not appear with the Standard service type. User Name Type the user name given to you by your ISP. Password Type the password associated with the user name above. Retype to confirm Password Type your password again to make sure that you have entered is correctly. Login Server IP Type the authentication server IP address here if your ISP gave you one. Address This field is not available for Telia Login. Telia Login Server (Telia Login only) Type the domain name of the Telia login server, for example login1.telia.com. Relogin Every(mins) (Telia Login only) The Telia server logs the Vantage CNM out if the Vantage CNM does not log in periodically. Type the number of minutes from 1 to 59 (30 default) for the Vantage CNM to wait between logins. WAN IP Address Assignment Get automatically from ISP Select this option If your ISP did not assign you a fixed IP address. This is the default selection. Use fixed IP address Select this option If the ISP assigned a fixed IP address. My WAN IP Address Enter your WAN IP address in this field if you selected Use Fixed IP Address. My WAN IP Subnet Mask Enter the IP subnet mask (if your ISP gave you one) in this field if you selected Use Fixed IP Address. Gateway IP Address Enter the gateway IP address (if your ISP gave you one) in this field if you selected Use Fixed IP Address. Advanced Setup RIP Direction RIP (Routing Information Protocol) allows a router to exchange routing information with other routers. The RIP Direction field controls the sending and receiving of RIP packets. Choose Both, None, In Only or Out Only. When set to Both or Out Only, the Vantage CNM will broadcast its routing table periodically. When set to Both or In Only, the Vantage CNM will incorporate RIP information that it receives. When set to None, the Vantage CNM will not send any RIP packets and will ignore any RIP packets received. By default, RIP Direction is set to Both. Vantage CNM User's Guide 79