ZyXEL Vantage CNM User Guide - Page 280
Table 110
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
Chapter 9 Device Network Settings Each field is described in the table below. Table 110 Device Operation > Device Configuration > Network > Interface > Bridge > Add/Edit LABEL DESCRIPTION Bridge Interface Properties Enable Select this to enable or clear this to disable this interface. Interface Name This field is read-only if you are editing the interface. Enter the name of the bridge interface. The format is brx, where x is 0 - 11. For example, br0, br3, and so on. Description Enter a description of this interface. It is not used elsewhere. You can use alphanumeric and characters, and it can be up to 60 characters long. Member Configuration Available This field displays Ethernet interfaces and VLAN interfaces that can become part of the bridge interface. An interface is not available in the following situations: • There is a virtual interface on top of it • It is already used in a different bridge interface Select one, and click the select arrow to add it to the bridge interface. Each bridge interface can only have one VLAN interface. Member This field displays the interfaces that are part of the bridge interface. Select one, and click the deselect arrow to remove it from the bridge interface. IP Address Assignment Get Automatically Select this if this interface is a DHCP client. In this case, the DHCP server configures the IP address, subnet mask, and gateway automatically. Use Fixed IP Address Select this if you want to specify the IP address, subnet mask, and gateway manually. IP Address This field is enabled if you select Use Fixed IP Address. Subnet Mask Enter the IP address for this interface. This field is enabled if you select Use Fixed IP Address. Gateway Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates what part of the IP address is the same for all computers in the network. This field is enabled if you select Use Fixed IP Address. Enter the IP address of the gateway. The ZyWALL sends packets to the gateway when it does not know how to route the packet to its destination. The gateway should be on the same network as the interface. Metric Enter the priority of the gateway (the ISP) on this interface. The ZyWALL decides which gateway to use based on this priority. The lower the number, the higher the priority. If two or more gateways have the same priority, the ZyWALL uses the one that was configured first. Interface Parameters 280 Vantage CNM User's Guide