ZyXEL Vantage CNM User Guide - Page 251
Device Operation > Device Configuration > Network > Interface > Ethernet, > Edit
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Chapter 9 Device Network Settings The following table describes the fields in this screen. Table 97 Device Operation > Device Configuration > Network > Interface > Ethernet > Edit LABEL DESCRIPTION Ethernet Interface Properties Enable Select this to enable this interface. Clear this to disable this interface. Interface Name This field is read-only. This is the name of the Ethernet interface. Description Enter a description of this interface. It is not used elsewhere. You can use alphanumeric and characters, and it can be up to 60 characters long. IP Address Assignment These IP address fields configure an IP address on the interface itself. If you change this IP address on the interface, you may also need to change a related address object for the network connected to the interface. For example, if you use this screen to change the IP address of your LAN interface, you should also change the corresponding LAN subnet address object. Get Select this to make the interface a DHCP client and automatically get Automatically the IP address, subnet mask, and gateway address from a DHCP server. Use Fixed IP Address IP Address You should not select this if the interface is assigned to a VRRP group. See Chapter 36 on page 595. Select this if you want to specify the IP address, subnet mask, and gateway manually. This field is enabled if you select Use Fixed IP Address. Enter the IP address for this interface. Subnet Mask This field is enabled if you select Use Fixed IP Address. Gateway Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates what part of the IP address is the same for all computers in the network. This field is enabled if you select Use Fixed IP Address. Enter the IP address of the gateway. The ZyWALL sends packets to the gateway when it does not know how to route the packet to its destination. The gateway should be on the same network as the interface. Metric Enter the priority of the gateway (if any) on this interface. The ZyWALL decides which gateway to use based on this priority. The lower the number, the higher the priority. If two or more gateways have the same priority, the ZyWALL uses the one that was configured first. Interface Parameters Upstream Bandwidth Enter the maximum amount of traffic, in kilobits per second, the ZyWALL can send through the interface to the network. Allowed values are 0 - 1048576. Vantage CNM User's Guide 251