ZyXEL Vantage CNM User Guide - Page 59
LAN Prestige
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chapter 5 Device Network Settings Table 13 Device Operation > Device Configuration > LAN > LAN (ZyNOS ZyWALL) LABEL DESCRIPTION Allow between LAN and WAN2 Select this check box to forward NetBIOS packets from the LAN to WAN port 2 and from WAN port 2 to the LAN. If your firewall is enabled with the default policy set to block WAN port 2 to LAN traffic, you also need to enable the default WAN port 2 to LAN firewall rule that forwards NetBIOS traffic. Allow between LAN and DMZ Clear this check box to block all NetBIOS packets going from the LAN to WAN port 2 and from WAN port 2 to the LAN. Select this check box to forward NetBIOS packets from the LAN to the DMZ and from the DMZ to the LAN. If your firewall is enabled with the default policy set to block DMZ to LAN traffic, you also need to enable the default DMZ to LAN firewall rule that forwards NetBIOS traffic. Allow between LAN and WLAN Clear this check box to block all NetBIOS packets going from the LAN to the DMZ and from the DMZ to the LAN. Select this check box to forward NetBIOS packets from the LAN to the WLAN and from the WLAN to the LAN. Apply Reset Clear this check box to block all NetBIOS packets going from the LAN to the WLAN and from the WLAN to the LAN. Click this to save your changes back to the device. Click this to begin configuring this screen afresh. 5.2 LAN (Prestige) Note: This section refers only to the LAN screen, but the information is applicable for the LAN, WLAN, and DMZ screens. Use this screen to configure the DHCP settings, TCP/IP settings, and Any IP settings for the LAN port on a device. To open this screen, click Device Operation Vantage CNM User's Guide 59