ZyXEL Vantage CNM User Guide - Page 450
Add Firmware
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 450 highlights
Chapter 18 Firmware Management Table 199 Device Operation > Firmware Management > Firmware List (continued) TYPE DESCRIPTION FW Version This field displays ZyXEL device firmware version. FW Release Time This field displays the date the firmware was created. Add Click Add to proceed to the next screen. Remove Click to delete a selected firmware from your Vantage CNM firmware management. Total Records This entry displays the total number of records on the current page of the list. 18.1.1 Add Firmware Use this screen to select the firmware you want to upload to Vantage CNM. To open this screen, click Add in the Device Operation > Firmware Management > Firmware List screen. You must upload the whole firmware zip file, which contains the following: • The device firmware (bin file extension). Only this firmware file is actually downloaded to the device. • The device default configuration file (config file extension). • Device firmware release notes (doc file extension) highlighting. • Boot module with bm file extension. • A file with XML file extension. Vantage CNM uses the XML file to gather the device type, firmware version and release date information. Besides, you have to make sure the FTP information has been configurated properly in the CNM System Setting > Configuration > Servers > Configuration. See Section 30.1 on page 561. Figure 224 Device Operation > Firmware Management > Firmware List > Add Type the file name and path of the firmware zip file, or click Browse to locate it. You may also create an alias that appears in the previous screen. Click Apply to load the firmware zip file to Vantage CNM. Then, click Device Operation > Firmware Management > Firmware Upgrade if you want to upload the firmware to one or more devices. See Section 18.3 on page 451. 450 Vantage CNM User's Guide