ZyXEL Vantage CNM User Guide - Page 297

Chapter 9 Device Network Settings 9.8.1 The Trunk Member List Screen Use this screen to add or remove interface(s) into or from the selected trunk. Click the Add icon in the Device Operation > Device Configuration > Network > Interface > Trunk > Edit sreen to open the following screen. Figure 131 Device Operation > Device Configuration > Network > Interface > Trunk > Edit > Add Each field is described in the table below. Table 116 Device Operation > Device Configuration > Network > Interface > Trunk > Edit > Add LABEL DESCRIPTION Available This field displays Ethernet interfaces and VLAN interfaces that can become part of the bridge interface. An interface is not available in the following situations: Member Apply Cancel • There is a virtual interface on top of it • It is already used in a different bridge interface Select one, and click the select arrow to add it to the bridge interface. Each bridge interface can only have one VLAN interface. This field displays the interfaces that are part of the bridge interface. Select one, and click the deselect arrow to remove it from the bridge interface. Click Apply to save your changes back to the ZyWALL. Click Cancel to exit this screen without saving. Vantage CNM User's Guide 297