ZyXEL Vantage CNM User Guide - Page 156

Chapter 6 Device Security Settings Table 53 Device Operation > Device Configuration > Security > VPN > VPN Rules (Manual) LABEL DESCRIPTION Remote IP Address This is the IP address(es) of computer(s) on the remote network behind the remote IPSec router. This field displays N/A when the Remote Gateway Address field displays 0.0.0.0. In this case only the remote IPSec router can initiate the VPN. The same (static) IP address is displayed twice when the Remote Network Address Type field in the VPN - Manual Key - Edit screen is configured to Single Address. The beginning and ending (static) IP addresses, in a range of computers are displayed when the Remote Network Address Type field in the VPN - Manual Key - Edit screen is configured to Range Address. Encap. IPSec Algorithm Remote Gateway Address Add Edit Remove A (static) IP address and a subnet mask are displayed when the Remote Network Address Type field in the VPN - Manual Key - Edit screen is configured to Subnet Address. This field displays Tunnel or Transport mode (Tunnel is the default selection). This field displays the security protocols used for an SA. Both AH and ESP increase device processing requirements and communications latency (delay). This is the static WAN IP address or domain name of the remote IPSec router. Click Add to add a new VPN policy. Click this to modify an existing VPN policy. Select a policy and click Remove to delete the VPN policy. A window displays asking you to confirm that you want to delete the VPN rule. When a VPN policy is deleted, subsequent policies move up in the page list. 156 Vantage CNM User's Guide