ZyXEL Vantage CNM User Guide - Page 151
Table 51
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Chapter 6 Device Security Settings Table 51 Device Operation > Device Configuration > Security > VPN > VPN Rules (IKE) > Network Policy Add/Edit (continued) LABEL DESCRIPTION Virtual Ending IP When you select Many One-to-One in the Type field, enter the Address ending (static) IP address of a range of translated IP addresses. Local Network The size of the private address range must be equal to the size of the translated virtual address range. Local IP addresses must be static and correspond to the remote IPSec router's configured remote IP addresses. Address Type Starting IP Address Ending IP Address/Subnet Mask Local Port Remote Network Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have the same local or remote IP address, but not both. You can configure multiple SAs between the same local and remote IP addresses, as long as only one is active at any time. Use the drop-down list box to choose Single Address, Range Address, or Subnet Address. Select Single Address for a single IP address. Select Range Address for a specific range of IP addresses. Select Subnet Address to specify IP addresses on a network by their subnet mask. When the Address Type field is configured to Single Address, enter a (static) IP address on the LAN behind your device. When the Address Type field is configured to Range Address, enter the beginning (static) IP address, in a range of computers on the LAN behind your device. When the Address Type field is configured to Subnet Address, this is a (static) IP address on the LAN behind your device. When the Address Type field is configured to Single Address, this field is N/A. When the Address Type field is configured to Range Address, enter the end (static) IP address, in a range of computers on the LAN behind your device. When the Address Type field is configured to Subnet Address, this is a subnet mask on the LAN behind your device. 0 is the default and signifies any port. Type a port number from 0 to 65535 in the Start and End fields. Some of the most common IP ports are: 21, FTP; 53, DNS; 23, Telnet; 80, HTTP; 25, SMTP; 110, POP3. Remote IP addresses must be static and correspond to the remote IPSec router's configured local IP addresses. Address Type Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have the same local or remote IP address, but not both. You can configure multiple SAs between the same local and remote IP addresses, as long as only one is active at any time. Use the drop-down list box to choose Single Address, Range Address, or Subnet Address. Select Single Address with a single IP address. Select Range Address for a specific range of IP addresses. Select Subnet Address to specify IP addresses on a network by their subnet mask. Vantage CNM User's Guide 151