ZyXEL Vantage CNM User Guide - Page 282
Type the IP address of the WINS Windows Internet Naming Service
View all ZyXEL Vantage CNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Chapter 9 Device Network Settings Table 110 Device Operation > Device Configuration > Network > Interface > Bridge > Add/Edit (continued) LABEL DESCRIPTION First DNS Server Second DNS Server Third DNS Server Specify the IP addresses up to three DNS servers for the DHCP clients to use. Use one of the following ways to specify these IP addresses. Custom Defined - enter a static IP address. From ISP - select the DNS server that another interface received from its DHCP server. ZyWALL - the DHCP clients use the IP address of this interface and the ZyWALL works as a DNS relay. First WINS Server, Second WINS Server Type the IP address of the WINS (Windows Internet Naming Service) server that you want to send to the DHCP clients. The WINS server keeps a mapping table of the computer names on your network and the IP addresses that they are currently using. Lease time Specify how long each computer can use the information (especially the IP address) before it has to request the information again. Choices are: infinite - select this if IP addresses never expire Static DHCP Table Ping Check Enable Check Method days, hours, and minutes - select this to enter how long IP addresses are valid. Click Edit static DHCP table to configure static IP addresses for the ZyWALL to assign to computers connected to this interface. The interface can regularly check the connection to the gateway you specified to make sure it is still available. You specify how often the interface checks the connection, how long to wait for a response before the attempt is a failure, and how many consecutive failures are required before the ZyWALL stops routing to the gateway. The ZyWALL resumes routing to the gateway the first time the gateway passes the connectivity check. Select this to turn on the connection check. Select the method that the gateway allows. Select icmp to have the ZyWALL regularly ping the gateway you specify to make sure it is still available. Select tcp to have the ZyWALL regularly perform a TCP handshake with the gateway you specify to make sure it is still available. Check Period Enter the number of seconds between connection check attempts. Check Timeout Enter the number of seconds to wait for a response before the attempt is a failure. Check Fail Tolerance Enter the number of consecutive failures before the ZyWALL stops routing through the gateway. Ping Default Gateway Select this to use the default gateway for the connectivity check. Ping this address Select this to specify a domain name or IP address for the connectivity check. Enter that domain name or IP address in the field next to it. 282 Vantage CNM User's Guide