ZyXEL Vantage CNM User Guide - Page 213

Chapter 6 Device Security Settings To open this screen, click a device, click Device Operation in the menu bar and then click Device Configuration > Security > X Auth > RADIUS in the navigation panel. Figure 85 Device Operation > Device Configuration > Security > X Auth > RADIUS The following table describes the fields in this screen. Table 78 Device Operation > Device Configuration > Security > X Auth > RADIUS LABEL DESCRIPTION Activate Authentication Enable this feature to have the device use an external authentication server in performing user authentication. Server IP Port Disable this feature if you will not use an external authentication server. If you disable this feature, you can still set the device to perform user authentication using the local user database. Enter the IP address of the external authentication server in dotted decimal notation. The default port of the RADIUS server for authentication is 1812. You need not change this value unless your network administrator instructs you to do so with additional information. Key Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external authentication server and the access points. Activate Accounting Server IP The key is not sent over the network. This key must be the same on the external authentication server and device. Enable this feature to do user accounting through an external authentication server. Enter the IP address of the external accounting server in dotted decimal notation. Vantage CNM User's Guide 213