ZyXEL Vantage CNM User Guide - Page 307

Chapter 9 Device Network Settings The following table describes the labels in this screen. Table 120 Device Operation > Device Configuration > Network > Routing > Static Route LABEL DESCRIPTION Page Size Select how many entries you want to display on each page. # This is the number of an individual static route. Destination This is the destination IP address. Subnet Mask This is the IP subnet mask. Next-Hop This is the IP address of the next-hop gateway or the interface through which the traffic is routed. The gateway is a router or switch on the same segment as your ZyWALL's interface(s). The gateway helps forward packets to their destinations. Metric This is the route's priority among the ZyWALL's routes. The smaller the number, the higher priority the route has. Add icon Click the Add icon to go to the screen where you can set up a static route on the ZyWALL. Click the Edit icon to go to the screen where you can edit the static route on the ZyWALL. Total Records Click the Remove icon to delete an existing static route from the ZyWALL. A window displays asking you to confirm that you want to delete the routing policy. This is the total number of static routes. 9.11.1 Static Route Add/Edit Screen Select a static route index number and click Add or Edit. The screen shown next appears. Use this screen to configure the required information for a static route. Figure 136 Device Operation > Device Configuration > Network > Routing > Static Route > Add Vantage CNM User's Guide 307