ZyXEL Vantage CNM User Guide - Page 295

> Edit - Spillover Chapter 9 Device Network Settings Each field is described in the table below. Table 115 Device Operation > Device Configuration > Network > Interface > Trunk > Edit LABEL DESCRIPTION Name This is read-only if you are editing an existing trunk. When adding a new trunk, enter a descriptive name for this trunk. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. This is the descriptive name for this trunk. Load Balancing Algorithm Select a load balancing method to use from the drop-down list box. Select Weighted Round Robin to balance the traffic load between interfaces based on their respective weights. Weighted round robin is activated only when the first group member interface has more traffic than it can handle. Select Least Load First to send new session traffic through the least utilized trunk member. # Member Select Spillover to send network traffic through the first interface in the group member list until there is enough traffic that the second interface needs to be used (and so on). This column displays the priorities of the group's interfaces. The order of the interfaces in the list is important since they are used in the order they are listed. Click this icon to open a screen where you can select an interface to be a group member. If you select an interface that is part of another Ethernet interface, the ZyWALL does not send traffic through the interface as part of the trunk. For example, if you have physical port 5 in the ge2 representative interface, you must select interface ge2 in order to send traffic through port 5 as part of the trunk. If you select interface ge5 as a member here, the ZyWALL will not send traffic through port 5 as part of the trunk. Vantage CNM User's Guide 295