ZyXEL Vantage CNM User Guide - Page 309

Chapter 9 Device Network Settings Click Device Operation > Device Configuration > Network > Routing > RIP to open the following screen. Figure 137 Device Operation > Device Configuration > Network > Routing > RIP The following table describes the labels in this screen. Table 122 Device Operation > Device Configuration > Network > Routing Protocol > RIP LABEL DESCRIPTION General Setup Authentication Select the authentication method used in the RIP network. This authentication protects the integrity, but not the confidentiality, of routing updates. None uses no authentication. Text uses a plain text password that is sent over the network (not very secure). MD5 uses an MD5 password and authentication ID (most secure). Text This field is available if the Authentication is Text. Type the Authentication password for text authentication. The key can consist of alphanumeric Key characters and the underscore, and it can be up to 8 characters long. MD5 This field is available if the Authentication is MD5. Type the ID for Authentication MD5 authentication. The ID can be between 1 and 255. ID MD5 Authentication Key This field is available if the Authentication is MD5. Type the password for MD5 authentication. The password can consist of alphanumeric characters and the underscore, and it can be up to 16 characters long. Redistribute Active Select this check box to advertise routes that were learned from the indicated Name. Name This field displays other sources of routing information that the ZyWALL can advertise in the RIP network. Vantage CNM User's Guide 309