ZyXEL Vantage CNM User Guide - Page 302

Chapter 9 Device Network Settings Table 118 Device Operation > Device Configuration > Network > Routing > Policy Route (continued) LABEL DESCRIPTION Schedule This is the name of the schedule object. none means the route is active at all times if enabled. Incoming This is the interface on which the packets are received. Source This is the name of the source IP address (group) object. any means all IP addresses. Destination This is the name of the destination IP address (group) object. any means all IP addresses. Service This is the name of the service object. any means all services. Next-Hop This is the next hop to which packets are directed. It helps forward packets to their destinations and can be a router, VPN tunnel, outgoing interface or trunk. SNAT This is the source IP address that the route uses. BWM Add icon It displays none if the ZyWALL does not perform NAT for this route. This is the maximum bandwidth allotted to the policy. 0 means there is no bandwidth limitation for this route. Click the Add icon in the heading row to add a new first entry. Click the Edit icon to go to the screen where you can edit the routing policy on the ZyWALL. Click the Add icon in an entry to add a rule below the current entry. Click the Remove icon to delete an existing routing policy from the ZyWALL. A window displays asking you to confirm that you want to delete the routing policy. In a numbered list, click the Move to N icon to display a field to type a number for where you want to put that rule and press [ENTER] to move the rule to the number that you typed. Total Records Apply Reset The ordering of your rules is important as they are applied in order of their numbering. This field displays the total number of policy routes. Click Apply to save your changes back to the ZyWALL. Click Reset to begin configuring this screen afresh. 302 Vantage CNM User's Guide