ZyXEL Vantage CNM User Guide - Page 274

Chapter 9 Device Network Settings Figure 117 Device Operation > Device Configuration > Network > Interface > VLAN > Add/Edit - DHCP Server Settings Figure 118 Device Operation > Device Configuration > Network > Interface > VLAN > Add/Edit - DHCP Relay Settings Each field is explained in the following table. Table 108 Device Operation > Device Configuration > Network > Interface > VLAN > Add/Edit LABEL DESCRIPTION VLAN Interface Properties Enable Select this to turn this interface on. Clear this to disable this interface. Interface Name This field is read-only if you are editing an existing VLAN interface. Enter the number of the VLAN interface. You can use a number from 0~4094. Port Select the Ethernet interface on which the VLAN interface runs. Virtual LAN Tag Enter the VLAN ID. This 12-bit number uniquely identifies each VLAN. Allowed values are 1 - 4094. (0 and 4095 are reserved.) Description Enter a description of this interface. It is not used elsewhere. You can use alphanumeric and characters, and it can be up to 60 characters long. IP Address Assignment Get Automatically Select this if this interface is a DHCP client. In this case, the DHCP server configures the IP address, subnet mask, and gateway automatically. Use Fixed IP Address You should not select this if the interface is assigned to a VRRP group. Select this if you want to specify the IP address, subnet mask, and gateway manually. 274 Vantage CNM User's Guide