ZyXEL Vantage CNM User Guide - Page 299

Chapter 9 Device Network Settings Each field is described in the following table. Table 117 Device Operation > Device Configuration > Network > Interface > Summary LABEL DESCRIPTION Name This field displays the name of each interface. If there is a Expand icon (plus-sign) next to the name, click this to look at the status of virtual interfaces on top of this interface. Status This field displays the current status of each interface. The possible values depend on what type of interface it is. For Ethernet interfaces: Inactive - The Ethernet interface is disabled. Down - The Ethernet interface does not have any physical ports associated with it or the Ethernet interface is enabled but not connected. Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the port speed and duplex setting (Full or Half). Port Group Inactive - The Ethernet interface does not have any physical ports associated with it. Port Group Up - The Ethernet interface is part of a port group and is connected. Port Group Down - The Ethernet interface is part of a port group and is not connected. For the auxiliary interface: Inactive - The auxiliary interface is disabled. Connected - The auxiliary interface is enabled and connected. Disconnected - The auxiliary interface is not connected. For virtual interfaces, this field always displays Up. If the virtual interface is disabled, it does not appear in the list. For VLAN and bridge interfaces, this field always displays Up. If the VLAN or bridge interface is disabled, it does not appear in the list. For PPP interfaces: Connected - The PPP interface is connected. Disconnected - The PPP interface is not connected. If the PPPP interface is disabled, it does not appear in the list. For WLAN interfaces: Up - The WLAN interface is enabled. Down - The WLAN interface is disabled. Vantage CNM User's Guide 299