ZyXEL Vantage CNM User Guide - Page 261

Chapter 9 Device Network Settings The following table describes the general wireless LAN labels. Table 101 Network > Interface > WLAN > Add (No Security) LABEL DESCRIPTION General Settings Enable Interface Select this option to turn on the wireless LAN interface. Interface Name Specify a number from 1~8 to complete the name for this wireless LAN interface. Description Enter a description of this interface. It is not used elsewhere. You can use alphanumeric and characters, and it can be up to 60 characters long. Virtual Access Point Settings SSID (Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. To make your wireless network more secure, change the default SSID to something that is difficult to guess. Hide SSID Broadcast Select to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning. Block IntraBSS Traffic Select this to prevent wireless clients in this profile's BSS from communicating with one another. Maximum Associations Specify the highest number of wireless clients that are allowed to connect to the wireless interface at the same time. WLAN Security Settings Vantage CNM User's Guide 261