ZyXEL Vantage CNM User Guide - Page 225

Chapter 7 Device Advanced Settings menu bar and then click Device Configuration > Advanced > Static Route in the navigation panel. Figure 92 Device Operation > Device Configuration > Advanced > Static Route The following table describes the labels in this screen. Table 85 Device Operation > Device Configuration > Advanced > Static Route LABEL DESCRIPTION # This is the number of an individual entry. Route Name This is the name that describes or identifies this route. To delete a static route, erase the name and then click Apply. Active This field shows whether this static route is active or not. Destination This parameter specifies the IP network address of the final destination. Routing is always based on network number. Gateway This is the IP address of the gateway. The gateway is an immediate neighbor of the device that will forward the packet to the destination. On the LAN, the gateway must be a router on the same segment as the device; over the WAN, the gateway must be the IP address of one of the remote nodes. Edit Click this to set up a static route on the device. Remove Click this to delete a static route. Vantage CNM User's Guide 225