ZyXEL Vantage CNM User Guide - Page 359

Chapter 14 Object To access this screen, go to the User screen (see Section 14.1 on page 357), and click either the Add icon or an Edit icon. Figure 158 Device Operation > Device Configuration > Object > User/Group > User > Add/Edit The following table describes the labels in this screen. Table 141 Device Operation > Device Configuration > Object > User/Group > User > Add/Edit LABEL DESCRIPTION User Name Type the user name for this user account. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. User names have to be different than user group names, and some words are reserved. See Section 14.1.1.1 on page 358. User Type Select what type of user this is. Choices are: Password • Admin - this user can look at and change the configuration of the ZyWALL • Limited-Admin - this user can look at the configuration of the ZyWALL but not to change it • User - this user has access to the ZyWALL's services but cannot look at the configuration • Guest - this user has access to the ZyWALL's services but cannot look at the configuration • Ext-User - this user account is maintained in a remote server, such as RADIUS or LDAP. This field is not available if you select the Ext-User user type. Retype Description Authentication Timeout Settings Enter the password of this user account. It can consist of 4 - 30 alphanumeric characters. This field is not available if you select the Ext-User user type. Enter the password again. Enter the description of each user, if any. You can use up to 60 printable ASCII characters. Default descriptions are provided. If you want to set authentication timeout to a value other than the default settings, select Use Manual Settings then fill your preferred values in the fields that follow. Vantage CNM User's Guide 359