ZyXEL Vantage CNM User Guide - Page 440

Chapter 17 Configuration Management The following table describes the fields in this screen. Table 193 Device Operation > Configuration Management > Building Block > Configuration BB > Add/Edit (ZLD Address) > Create TYPE DESCRIPTION Address Type Select the type of address you want to create. Choices are: HOST, RANGE, SUBNET. Note: The ZyWALL automatically updates address objects that are based on an interface's IP address, subnet, or gateway if the interface's IP address settings change. For example, if you change ge1's IP address, the ZyWALL automatically updates the corresponding interface-based, LAN subnet address object. IP Address This field is only available if the Address Type is HOST. This field cannot be blank. Enter the IP address that this address object represents. Starting IP Address This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the beginning of the range of IP addresses that this address object represents. Ending IP Address This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the end of the range of IP address that this address object represents. Network This field is only available if the Address Type is SUBNET, in which case this field cannot be blank. Enter the IP address of the network that this address object represents. Netmask This field is only available if the Address Type is SUBNET, in which case this field cannot be blank. Enter the subnet mask of the network that this address object represents. Use dotted decimal format. Save&Exit Click this to save your changes and back to the previous screen. Cancel Click this to exit this screen without saving your changes. 17.8.4 Create a Service Configuration BB (ZLD) If you select a ZLD ZyWALL model and ZLD Service in the Device Operation > Configuration Management > Building Block > Configuration BB > Add or 440 Vantage CNM User's Guide