ZyXEL Vantage CNM User Guide - Page 376

Chapter 14 Object The following table describes the labels in this screen. Table 152 Device Operation > Device Configuration > Object > Service > Service > Add/Edit LABEL DESCRIPTION Name Type the name used to refer to the service. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. IP Protocol Select the protocol the service uses. Choices are: TCP, UDP, ICMP, and User Defined. Starting Port Ending Port This field appears if the IP Protocol is TCP or UDP. Specify the port number(s) used by this service. If you fill in one of these fields, the service uses that port. If you fill in both fields, the service uses the range of ports. ICMP Type This field appears if the IP Protocol is ICMP Type. IP Protocol Number Apply Cancel Select the ICMP message used by this service. This field displays the message text, not the message number. This field appears if the IP Protocol is User Defined. Enter the number of the next-level protocol (IP protocol). Allowed values are 0 - 255. Click Apply to save your changes back to the ZyWALL. Click Cancel to exit this screen without saving your changes. 14.6 The Service Group Summary Screen The Service Group summary screen provides a summary of all service groups. In addition, this screen allows you to add, edit, and remove service groups. 376 Vantage CNM User's Guide