Dell PowerVault MD3200 CLI Guide - Page 207
Set Storage Array, isnsRegistration=TRUE | FALSE
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Set Storage Array This command defines the properties of the storage array. Syntax set storageArray (alarm=(enable | disable | mute) | autoSupportConfig (enable | disable) | cacheBlockSize=cacheBlockSizeValue | cacheFlushStart=cacheFlushStartSize | cacheFlushStop=cacheFlushStopSize | defaultHostType=("hostTypeName" | hostTypeIdentifier) failoverAlertDelay=delayValue | mediaScanRate=(disabled | 1-30) | password="password" | userLabel="storageArrayName") isnsRegistration=(TRUE | FALSE) Parameters Parameter alarm Description The setting for the audible alarm. This parameter has these values: • enable-The audible alarm is turned on and sounds if a fault occurs. • disable-The audible alarm is turned off and does not sound if a fault occurs. • mute-The audible alarm is turned off if it is sounding. If another fault occurs after you set the audible alarm to mute, the audible alarm sounds again. Script Commands 207