Dell PowerVault MD3200 CLI Guide - Page 253
Start Physical Disk Initialize, This command starts physical disk initialization.
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Parameter patternNumber maxErrorCount testIterations timeout Description The hexadecimal data pattern you want to use to run the test. This number can be any hexadecimal number between 0000 to FFFF. The number of errors that you want to accept before terminating the test. The number of times that you want to repeat the test. The length of time in minutes that you want to run the test. NOTE: Use the save physicalDiskChannel faultDiagnostics command and the stop physicalDiskChannel faultDiagnostics command in association with the start physicalDiskChannel faultDiagnostics command. These commands are needed to save the diagnostic test results to a file and to stop the diagnostic test. NOTE: You can stop this command at any time by pressing Ctrl+C. Start Physical Disk Initialize This command starts physical disk initialization. CAUTION: As soon as you enter this command, all user data is erased. Syntax start physicalDisk [enclosureID,slotID] initialize Parameters Parameter physicalDisk Description Identifies the enclosure and slot where the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and slot ID value. Script Commands 253