HP Color LaserJet Enterprise CM4540 HP Color LaserJet Enterprise CM4540 MFP - - Page 195
Upload New Firmware Image, Return to Device Group
View all HP Color LaserJet Enterprise CM4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
6. If the name of the .RFU file is not listed in the All Available Images dialog box, click Browse in the Upload New Firmware Image dialog box and navigate to the location of the .RFU file that you downloaded from the Web at the start of this procedure. If the filename is listed, select it. 7. Click Upload to move the .RFU file from your hard drive to the HP Web Jetadmin server. 8. Refresh the browser. 9. Select the .RFU file from the Printer Firmware Update drop-down menu. 10. Click Update Firmware. HP Web Jetadmin sends the selected .RFU file to the product. 11. The download process begins and the firmware is updated on the product. This can take several minutes. Let the process finish without further interaction with the product or the computer. The messages described in the section Printer messages during the firmware update on page 165 appear on the control panel. NOTE: The product automatically turns off and then on again to activate the update; this can happen more than once. At the end of the update process, the READY message appears on the control panel. Do not turn off the product or interfere with the update until you see this message. HP Web Jetadmin V7.8 or 8.x can also be used to perform multiple or unattended installations. Complete the following steps for multiple or unattended installations. 1. Start HP Web Jetadmin. 2. Create a device group. A simple way to do this is to follow these steps: a. Click Device Management, and then click All Devices. -or- b. Shift-click to select products that you want to be included in the group, and then click OK. -or- c. When prompted, type a name for the new device group, and then click OK. 3. To modify several products in a group, click the group name, and then click Open. 4. The drop-down menu for Device Group Tools appears on the right side of the window. Scroll if necessary to view it. 5. In the Device Group Tools drop-down box, select an action. Type the appropriate information. Click Return to Device Group when finished. ENWW Remote firmware update 177