HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 51

to the same XBC. Check CC, Check XBC, Contact HP Support Personnel. WBEM

Get HP Integrity Superdome SX2000 PDF manuals and user guides View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Event ID Event Severity 8205 Warning 8206 Error 8207 Error 8212 Warning 8214 Warning 8216 Warning 8218 Warning 8219 Error 8220 Error 8238 Error 8239 Warning 8240 Error 8243 Error 8257 Warning 8261 Warning Event Description Testing of correctable errors injected from the CC has failed. Probable Cause: Either the CC failed to inject the errors, the XBC failed to detect them, or PDC could not access the XBC CSR. Recommended Action: Check results from other cells connected to the same XBC. Check CC, Check XBC, Contact HP Support Personnel. WBEM EventID: 731. WBEM ProviderName: FPL_IndicationProvider. A cabinet has been configured using an invalid cabinet number. Probable Cause: Re-configure cabinet to use a valid cabinet number. WBEM EventID: 732. WBEM ProviderName: FPL_IndicationProvider. Cells trying to join a PD are at incompatible firmware revisions. Probable Cause: The reporting cell is at a different firmware revision than the cell reported in the data field. A PD cannot be established. Please reprogram the 2 cells to the same firmware revision. WBEM EventID: 733. WBEM ProviderName: FPL_IndicationProvider. An attempt to write to a device on the PM's I2C bus has failed. Probable Cause: A hardware error has occurred. Recommended Action: Replace the UGUY board. WBEM EventID: 734. WBEM ProviderName: FPL_IndicationProvider. An attempt to read from a device on the PM's I2C bus has failed. Probable Cause: A hardware error has occurred. Recommended Action: Replace the UGUY board. WBEM EventID: 735. WBEM ProviderName: FPL_IndicationProvider. An error was encountered updating the cell info structure in ICM. Probable Cause: This should not happen. Contact engineering to diagnose the problem. WBEM EventID: 736. WBEM ProviderName: FPL_IndicationProvider. An error was encountered pointing the slave cell consoles to the diva. Probable Cause: A CPU on the slave cell could not process an interrupt in time or establish the diva console. WBEM EventID: 737. WBEM ProviderName: FPL_IndicationProvider. An error was encountered trying to relocate a slave cells registry. Probable Cause: There could be a PD rendezvous error or a processor on the slave cell failed to respond to an interrupt in time. WBEM EventID: 738. WBEM ProviderName: FPL_IndicationProvider. Complex Profile Group C CRC didn't match the expected value. Probable Cause: Push out a new Group C complex profile. WBEM EventID: 2441. WBEM ProviderName: FPL_IndicationProvider. Failure to identify a core cell during Global MCA. Probable Cause: This will lead to a system reset. WBEM EventID: 1034. WBEM ProviderName: FPL_IndicationProvider. Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 742. WBEM ProviderName: FPL_IndicationProvider. Internal firmware programming error in the PMI handler. Probable Cause: Report the IP to the firmware team. Reset the system. This cannot be worked around in the field. WBEM EventID: 743. WBEM ProviderName: FPL_IndicationProvider. During a Cell On Line Add inconsistent number of cells discovered. Probable Cause: This can be caused by inconsistent profile information. This can also occur when an expected cell did not make the original boot of the partition. Update the complex profile to all the cells with a correct view of the system and try to add the cell again. WBEM EventID: 744. WBEM ProviderName: FPL_IndicationProvider. Error reading source cell port on XBC during data traversability test. Probable Cause: A read error most likely occurred. Look for preceding chassis codes to determine exact cause. WBEM EventID: 745. WBEM ProviderName: FPL_IndicationProvider. OLA cell is incompatible with the existing partition. Probable Cause: OLA cell has incompatible resources. Recommended Action: Change the resources on the cell to be compatible with the existing partition or attempt to OLA a different cell. WBEM EventID: 6949. WBEM ProviderName: FPL_IndicationProvider. Platform Events 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Event Description
Event
Severity
Event ID
Testing of correctable errors injected from the CC has failed. Probable Cause: Either
the CC failed to inject the errors, the XBC failed to detect them, or PDC could not
access the XBC CSR. Recommended Action: Check results from other cells connected
to the same XBC. Check CC, Check XBC, Contact HP Support Personnel. WBEM
EventID: 731. WBEM ProviderName: FPL_IndicationProvider.
Warning
8205
A cabinet has been configured using an invalid cabinet number. Probable Cause:
Re-configure cabinet to use a valid cabinet number. WBEM EventID: 732. WBEM
ProviderName: FPL_IndicationProvider.
Error
8206
Cells trying to join a PD are at incompatible firmware revisions. Probable Cause: The
reporting cell is at a different firmware revision than the cell reported in the data
field. A PD cannot be established. Please reprogram the 2 cells to the same firmware
revision. WBEM EventID: 733. WBEM ProviderName: FPL_IndicationProvider.
Error
8207
An attempt to write to a device on the PM's I2C bus has failed. Probable Cause: A
hardware error has occurred. Recommended Action: Replace the UGUY board.
WBEM EventID: 734. WBEM ProviderName: FPL_IndicationProvider.
Warning
8212
An attempt to read from a device on the PM's I2C bus has failed. Probable Cause: A
hardware error has occurred. Recommended Action: Replace the UGUY board.
WBEM EventID: 735. WBEM ProviderName: FPL_IndicationProvider.
Warning
8214
An error was encountered updating the cell info structure in ICM. Probable Cause:
This should not happen. Contact engineering to diagnose the problem. WBEM
EventID: 736. WBEM ProviderName: FPL_IndicationProvider.
Warning
8216
An error was encountered pointing the slave cell consoles to the diva. Probable Cause:
A CPU on the slave cell could not process an interrupt in time or establish the diva
console. WBEM EventID: 737. WBEM ProviderName: FPL_IndicationProvider.
Warning
8218
An error was encountered trying to relocate a slave cells registry. Probable Cause:
There could be a PD rendezvous error or a processor on the slave cell failed to respond
to an interrupt in time. WBEM EventID: 738. WBEM ProviderName:
FPL_IndicationProvider.
Error
8219
Complex Profile Group C CRC didn't match the expected value. Probable Cause:
Push out a new Group C complex profile. WBEM EventID: 2441. WBEM
ProviderName: FPL_IndicationProvider.
Error
8220
Failure to identify a core cell during Global MCA. Probable Cause: This will lead to
a system reset. WBEM EventID: 1034. WBEM ProviderName: FPL_IndicationProvider.
Error
8238
Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred.
Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 742.
WBEM ProviderName: FPL_IndicationProvider.
Warning
8239
Internal firmware programming error in the PMI handler. Probable Cause: Report
the IP to the firmware team. Reset the system. This cannot be worked around in the
field. WBEM EventID: 743. WBEM ProviderName: FPL_IndicationProvider.
Error
8240
During a Cell On Line Add inconsistent number of cells discovered. Probable Cause:
This can be caused by inconsistent profile information. This can also occur when an
expected cell did not make the original boot of the partition. Update the complex
profile to all the cells with a correct view of the system and try to add the cell again.
WBEM EventID: 744. WBEM ProviderName: FPL_IndicationProvider.
Error
8243
Error reading source cell port on XBC during data traversability test. Probable Cause:
A read error most likely occurred. Look for preceding chassis codes to determine
exact cause. WBEM EventID: 745. WBEM ProviderName: FPL_IndicationProvider.
Warning
8257
OLA cell is incompatible with the existing partition. Probable Cause: OLA cell has
incompatible resources. Recommended Action: Change the resources on the cell to
be compatible with the existing partition or attempt to OLA a different cell. WBEM
EventID: 6949. WBEM ProviderName: FPL_IndicationProvider.
Warning
8261
Platform Events
51