HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 88

Failure writing Redundant Clock Source RCS or Hot Swap Oscillator HSO boards

Get HP Integrity Superdome SX2000 PDF manuals and user guides View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Event ID Event Severity 11459 Error 11461 Error 11463 Error 11465 Error 11467 Error 11468 Error 11471 Error 11478 Warning 11479 Error 11481 Warning 11482 Error 11483 Warning 11484 Error Event Description System backplane power has reported a 12v power fault. The data field contains the physical location of the fault. Probable Cause: System backplane power board has reported a 12v fault. Recommended Action: Check system backplane power board. WBEM EventID: 4909. WBEM ProviderName: FPL_IndicationProvider. System backplane power has reported a 3.3v power fault. The data field contains the physical location of the fault. Probable Cause: System backplane power board has reported a 3.3v fault. Recommended Action: Check system backplane power board. WBEM EventID: 4910. WBEM ProviderName: FPL_IndicationProvider. System backplane power has reported a 1.5v power fault. The data field contains the physical location of the fault. Probable Cause: System backplane power board has reported a 1.5v fault. Recommended Action: Check system backplane power board. WBEM EventID: 4911. WBEM ProviderName: FPL_IndicationProvider. System backplane power has reported a 2.5v power fault. The data field contains the physical location of the fault. Probable Cause: System backplane power board has reported a 2.5v fault. Recommended Action: Check system backplane power board. WBEM EventID: 4912. WBEM ProviderName: FPL_IndicationProvider. One or more power rails is providing insufficient power to the backplane. Probable Cause: There has been multiple faults on the same power rail. Recommended Action: look for additional events describing action to take. WBEM EventID: 4913. WBEM ProviderName: FPL_IndicationProvider. Clock fault for clocks supplied from the Redundant Clock Source (RCS) board to the system backplane. RCS board is no longer providing clocks to the backplane. The data field contains the physical location of the RCS. Probable Cause: RCS assembly has reported a fault. Recommended Action: Check RCS assembly. WBEM EventID: 4914. WBEM ProviderName: FPL_IndicationProvider. Clock fault for clocks supplied from the Hot Swap Oscillator (HSO) board to the system backplane. HSO has reported a fault or has been removed. The data field contains the physical location of the HSO. Probable Cause: HSO assembly has reported a fault or has been removed. Recommended Action: Check HSO assembly. WBEM EventID: 4915. WBEM ProviderName: FPL_IndicationProvider. The operational clock frequencies do not match between the Redundant Clock Source (RCS) and the Hot Swap Oscillator (HSO). The data field contains the physical location of the HSO. Probable Cause: Operating frequency of the HSO does not match that of the RCS. Recommended Action: Check HSO assembly. WBEM EventID: 4916. WBEM ProviderName: FPL_IndicationProvider. The clock margin of the system backplane failed. WBEM EventID: 4917. WBEM ProviderName: FPL_IndicationProvider. System backplane Hot Swap Oscillator (HSO) boards are NOT redundant. Probable Cause: HSO assembly has been removed or has a fault condition. Recommended Action: look for additional events describing action to take. WBEM EventID: 5231. WBEM ProviderName: FPL_IndicationProvider. System backplane Hot Swap Oscillator (HSO) boards are insufficient. Probable Cause: There are no HSO present or all clock sources have faulted. Recommended Action: Look for additional events describing action to take. WBEM EventID: 4918. WBEM ProviderName: FPL_IndicationProvider. Failure reading Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards EEPROM. Probable Cause: device is not accessible over i2c Recommended Action: check HSO + RCS boards. WBEM EventID: 4919. WBEM ProviderName: FPL_IndicationProvider. Failure writing Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action: check HSO and RCS boards. WBEM EventID: 4920. WBEM ProviderName: FPL_IndicationProvider. 88 WBEM Provider Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Event Description
Event
Severity
Event ID
System backplane power has reported a 12v power fault. The data field contains the
physical location of the fault. Probable Cause: System backplane power board has
reported a 12v fault. Recommended Action: Check system backplane power board.
WBEM EventID: 4909. WBEM ProviderName: FPL_IndicationProvider.
Error
11459
System backplane power has reported a 3.3v power fault. The data field contains the
physical location of the fault. Probable Cause: System backplane power board has
reported a 3.3v fault. Recommended Action: Check system backplane power board.
WBEM EventID: 4910. WBEM ProviderName: FPL_IndicationProvider.
Error
11461
System backplane power has reported a 1.5v power fault. The data field contains the
physical location of the fault. Probable Cause: System backplane power board has
reported a 1.5v fault. Recommended Action: Check system backplane power board.
WBEM EventID: 4911. WBEM ProviderName: FPL_IndicationProvider.
Error
11463
System backplane power has reported a 2.5v power fault. The data field contains the
physical location of the fault. Probable Cause: System backplane power board has
reported a 2.5v fault. Recommended Action: Check system backplane power board.
WBEM EventID: 4912. WBEM ProviderName: FPL_IndicationProvider.
Error
11465
One or more power rails is providing insufficient power to the backplane. Probable
Cause: There has been multiple faults on the same power rail. Recommended Action:
look for additional events describing action to take. WBEM EventID: 4913. WBEM
ProviderName: FPL_IndicationProvider.
Error
11467
Clock fault for clocks supplied from the Redundant Clock Source (RCS) board to the
system backplane. RCS board is no longer providing clocks to the backplane. The
data field contains the physical location of the RCS. Probable Cause: RCS assembly
has reported a fault. Recommended Action: Check RCS assembly. WBEM EventID:
4914. WBEM ProviderName: FPL_IndicationProvider.
Error
11468
Clock fault for clocks supplied from the Hot Swap Oscillator (HSO) board to the
system backplane. HSO has reported a fault or has been removed. The data field
contains the physical location of the HSO. Probable Cause: HSO assembly has reported
a fault or has been removed. Recommended Action: Check HSO assembly. WBEM
EventID: 4915. WBEM ProviderName: FPL_IndicationProvider.
Error
11471
The operational clock frequencies do not match between the Redundant Clock Source
(RCS) and the Hot Swap Oscillator (HSO). The data field contains the physical location
of the HSO. Probable Cause: Operating frequency of the HSO does not match that
of the RCS. Recommended Action: Check HSO assembly. WBEM EventID: 4916.
WBEM ProviderName: FPL_IndicationProvider.
Warning
11478
The clock margin of the system backplane failed. WBEM EventID: 4917. WBEM
ProviderName: FPL_IndicationProvider.
Error
11479
System backplane Hot Swap Oscillator (HSO) boards are NOT redundant. Probable
Cause: HSO assembly has been removed or has a fault condition. Recommended
Action: look for additional events describing action to take. WBEM EventID: 5231.
WBEM ProviderName: FPL_IndicationProvider.
Warning
11481
System backplane Hot Swap Oscillator (HSO) boards are insufficient. Probable Cause:
There are no HSO present or all clock sources have faulted. Recommended Action:
Look for additional events describing action to take. WBEM EventID: 4918. WBEM
ProviderName: FPL_IndicationProvider.
Error
11482
Failure reading Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards
EEPROM. Probable Cause: device is not accessible over i2c Recommended Action:
check HSO + RCS boards. WBEM EventID: 4919. WBEM ProviderName:
FPL_IndicationProvider.
Warning
11483
Failure writing Redundant Clock Source (RCS) or Hot Swap Oscillator HSO boards
EEPROM. Probable Cause: device is not accessible over i2c. Recommended Action:
check HSO and RCS boards. WBEM EventID: 4920. WBEM ProviderName:
FPL_IndicationProvider.
Error
11484
88
WBEM Provider Event Tables