HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 58

A read after write of a XBC CSR failed. Probable Cause: Fabric Access Error, XBC

Get HP Integrity Superdome SX2000 PDF manuals and user guides View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Event ID Event Severity 8898 Warning 8900 Error 8906 Warning 8926 Warning 8930 Error 8931 Warning 8936 Warning 8939 Warning 8940 Error 8941 Error 8942 Error 8954 Warning 8959 Error 8960 Error 8962 Warning Event Description Failed to read the CC's fabric link error mask. Probable Cause: CC CSR access failure. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 856. WBEM ProviderName: FPL_IndicationProvider. Could not initialize the CC to CC link upon boot. Probable Cause: CC CSR Access Failure. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 857. WBEM ProviderName: FPL_IndicationProvider. An Error occurred trying to notify the MP of the attempted reset. Probable Cause: The MP is not functioning or the PDHC cannot communicate with it. Reset the MP. WBEM EventID: 858. WBEM ProviderName: FPL_IndicationProvider. Failed disabling the XIN link for a single cell model. Probable Cause: Fabric Access Error. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 860. WBEM ProviderName: FPL_IndicationProvider. Error while getting the XBC Semaphore. Probable Cause: Most likely a hardware problem, but confirm the cause by looking at the return status. Recommended Action: Check XBC, Backplane, Flex Cables, Contact HP Support Personnel for further troubleshooting. WBEM EventID: 861. WBEM ProviderName: FPL_IndicationProvider. Error releasing the XBC Semaphore. Probable Cause: Fabric Access problem. Either an error reading the hardware or XBC Key contention. Recommended Action: Look for additional chassis codes to provide detail. Check XBC, Backplane, Flex Cables, Contact HP Support Personnel. WBEM EventID: 862. WBEM ProviderName: FPL_IndicationProvider. Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 864. WBEM ProviderName: FPL_IndicationProvider. The CC's XIN link was found to be already initialized. Probable Cause: Firmware problem. Contact HP Support Personnel. WBEM EventID: 865. WBEM ProviderName: FPL_IndicationProvider. Cell has been disabled by the PDHC because no CPU modules were found. Probable Cause: No CPU modules are installed. Recommended Action: Install CPU modules on the Cell. WBEM EventID: 866. WBEM ProviderName: FPL_IndicationProvider. Cell has been disabled by PDHC FW because the CPU modules are not compatible. Probable Cause: At least one of the installed CPU modules are incompatible with at least one other CPU module. Recommended Action: Contact HP support personnel to troubleshoot the CPU modules on the Cell. WBEM EventID: 867. WBEM ProviderName: FPL_IndicationProvider. Cell has been disabled because of invalid data in a CPU module Scratch EEPROM. Probable Cause: The CPU module is not an HP CPU module, or the FRUID data for this CPU module has not been programmed. Recommended Action: Contact HP support personnel to troubleshoot the CPU module. WBEM EventID: 868. WBEM ProviderName: FPL_IndicationProvider. The Cell Battery voltage level low warning. Probable Cause: The Cell Battery is low. Recommended Action: It needed to be replaced. WBEM EventID: 869. WBEM ProviderName: FPL_IndicationProvider. Error while copying the XBC routing to the local port. Probable Cause: Error accessing XBC CSRs. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 870. WBEM ProviderName: FPL_IndicationProvider. A read after write of a XBC CSR failed. Probable Cause: Fabric Access Error, XBC Key Disabled. Check XBC, links, backplane, Contact HP Support Personnel for further troubleshooting. WBEM EventID: 871. WBEM ProviderName: FPL_IndicationProvider. Couldn't release the Semaphore while writing routing states. Probable Cause: Fabric Access Error. Check XBC, Check links. WBEM EventID: 872. WBEM ProviderName: FPL_IndicationProvider. 58 WBEM Provider Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Event Description
Event
Severity
Event ID
Failed to read the CC's fabric link error mask. Probable Cause: CC CSR access failure.
Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM
EventID: 856. WBEM ProviderName: FPL_IndicationProvider.
Warning
8898
Could not initialize the CC to CC link upon boot. Probable Cause: CC CSR Access
Failure. Recommended Action: Contact HP Support personnel to analyze the fabric.
WBEM EventID: 857. WBEM ProviderName: FPL_IndicationProvider.
Error
8900
An Error occurred trying to notify the MP of the attempted reset. Probable Cause:
The MP is not functioning or the PDHC cannot communicate with it. Reset the MP.
WBEM EventID: 858. WBEM ProviderName: FPL_IndicationProvider.
Warning
8906
Failed disabling the XIN link for a single cell model. Probable Cause: Fabric Access
Error. Recommended Action: Contact HP Support personnel to analyze the fabric.
WBEM EventID: 860. WBEM ProviderName: FPL_IndicationProvider.
Warning
8926
Error while getting the XBC Semaphore. Probable Cause: Most likely a hardware
problem, but confirm the cause by looking at the return status. Recommended Action:
Check XBC, Backplane, Flex Cables, Contact HP Support Personnel for further
troubleshooting. WBEM EventID: 861. WBEM ProviderName: FPL_IndicationProvider.
Error
8930
Error releasing the XBC Semaphore. Probable Cause: Fabric Access problem. Either
an error reading the hardware or XBC Key contention. Recommended Action: Look
for additional chassis codes to provide detail. Check XBC, Backplane, Flex Cables,
Contact HP Support Personnel. WBEM EventID: 862. WBEM ProviderName:
FPL_IndicationProvider.
Warning
8931
Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred.
Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 864.
WBEM ProviderName: FPL_IndicationProvider.
Warning
8936
The CC's XIN link was found to be already initialized. Probable Cause: Firmware
problem. Contact HP Support Personnel. WBEM EventID: 865. WBEM ProviderName:
FPL_IndicationProvider.
Warning
8939
Cell has been disabled by the PDHC because no CPU modules were found. Probable
Cause: No CPU modules are installed. Recommended Action: Install CPU modules
on the Cell. WBEM EventID: 866. WBEM ProviderName: FPL_IndicationProvider.
Error
8940
Cell has been disabled by PDHC FW because the CPU modules are not compatible.
Probable Cause: At least one of the installed CPU modules are incompatible with at
least one other CPU module. Recommended Action: Contact HP support personnel
to troubleshoot the CPU modules on the Cell. WBEM EventID: 867. WBEM
ProviderName: FPL_IndicationProvider.
Error
8941
Cell has been disabled because of invalid data in a CPU module Scratch EEPROM.
Probable Cause: The CPU module is not an HP CPU module, or the FRUID data for
this CPU module has not been programmed. Recommended Action: Contact HP
support personnel to troubleshoot the CPU module. WBEM EventID: 868. WBEM
ProviderName: FPL_IndicationProvider.
Error
8942
The Cell Battery voltage level low warning. Probable Cause: The Cell Battery is low.
Recommended Action: It needed to be replaced. WBEM EventID: 869. WBEM
ProviderName: FPL_IndicationProvider.
Warning
8954
Error while copying the XBC routing to the local port. Probable Cause: Error accessing
XBC CSRs. Recommended Action: Contact HP Support personnel to analyze the
fabric. WBEM EventID: 870. WBEM ProviderName: FPL_IndicationProvider.
Error
8959
A read after write of a XBC CSR failed. Probable Cause: Fabric Access Error, XBC
Key Disabled. Check XBC, links, backplane, Contact HP Support Personnel for further
troubleshooting. WBEM EventID: 871. WBEM ProviderName: FPL_IndicationProvider.
Error
8960
Couldn't release the Semaphore while writing routing states. Probable Cause: Fabric
Access Error. Check XBC, Check links. WBEM EventID: 872. WBEM ProviderName:
FPL_IndicationProvider.
Warning
8962
58
WBEM Provider Event Tables