HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 67
Support personnel to check the XBC, Flex Cables, Backplane, CCs, etc. WBEM EventID
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Event ID Event Severity 9498 Warning 9652 Warning 9653 Warning 9658 Error 9659 Warning 9661 Error 9663 Error 9666 Warning 9668 Error 9670 Error 9674 Warning Event Description Fabric link route around failed because the route around port was bad. Probable Cause: 2 or more XBC links are not routable. Recommended Action: Contact HP Support personnel to check the XBC, Flex Cables, Backplane, CCs, etc. WBEM EventID: 975. WBEM ProviderName: FPL_IndicationProvider. Predictive Failure in Memory. Probable Cause: You will receive this message if the memory system is observing a lot of corrected ECC errors from a DIMM. The specified DIMM may need to be serviced. Recommended Action: Contact your HP support representative to check the affected hardware. WBEM EventID: 1805. WBEM ProviderName: FPL_IndicationProvider. Windows: Server Agents Management data not accessible, locked property. Probable Cause: The installed management software has detected an unstable state of the underlying IPMI (Intelligent Platform Management Interface) subsystem and has disabled all management information from being shown by any manageability applications. The management information will become available automatically as soon as the IPMI subsystem has stabilized. Recommended Action: No action is required. WBEM EventID: 1806. WBEM ProviderName: FPL_IndicationProvider. PCI slot exceeds power limit. Probable Cause: The I/O configuration's power consumption exceeds the supported limit. Recommended Action: Remove the I/O card from each slot indicated by an IO_PCI_POWER_OVERLOAD_ERR event. WBEM EventID: 976. WBEM ProviderName: FPL_IndicationProvider. (warning) Outputted in MFG, when Memory SBE Seeding is enabled. Probable Cause: In MFG with Memory SBE Seeding control Flag (26) Enabled. Should never be seen at a customer's machine. WBEM EventID: 977. WBEM ProviderName: FPL_IndicationProvider. Failed to read the fabric topology information from the XBC. Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 978. WBEM ProviderName: FPL_IndicationProvider. PDC failed to initialize PA specific fields of group C after finding IA bit set. Probable Cause: An error occurred which prevented the complex profiles from being distributed properly. Recommended Action: Create and distribute a new complex profile using ParMgr on a functional partition in the complex. Restore the last complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. Generate a genesis complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. WBEM EventID: 1807. WBEM ProviderName: FPL_IndicationProvider. Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 1808. WBEM ProviderName: FPL_IndicationProvider. PDC could not read the copy of profile C stored in ICM. Probable Cause: An error occurred which prevented the complex profiles from being distributed properly. Recommended Action: Create and distribute a new complex profile using ParMgr on a functional partition in the complex. Restore the last complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. Generate a genesis complex profile using the 'CC' command from the MP, then use ParMgr to create a new complex profile. WBEM EventID: 1809. WBEM ProviderName: FPL_IndicationProvider. Could not disable the XIN link before a fabricless boot. Probable Cause: Fabric Access Error. Recommended Action: Contact HP Support personnel to check the CC, Check XBC. WBEM EventID: 981. WBEM ProviderName: FPL_IndicationProvider. Fail to GetSiblingCpuCoreNum() in BootGetSpiromData(). Probable Cause: Hardware problem with the CPU. Recommended Action: Contact HP Support to confirm the CPU is functioning properly. WBEM EventID: 1810. WBEM ProviderName: FPL_IndicationProvider. Platform Events 67