HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 91
firmware. WBEM EventID: 4951. WBEM ProviderName: FPL_IndicationProvider.
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Event ID Event Severity 11580 Warning 11581 Warning 11582 Warning 11583 Warning 11584 Warning 11585 Warning 11586 Warning 11597 Warning 11598 Warning 11599 Warning 11603 Error Event Description The local cell was unable to clear the link_off bit on at least one CC-CC link. Data field: return value of Phase3BackToBackPrep(). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4944. WBEM ProviderName: FPL_IndicationProvider. ArfOLAPreRendez() was unable to reach the added cell. Data field: bitmap of unreachable cells. Probable Cause: Firmware was unable to find a valid route to a cell being added by OLA. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4945. WBEM ProviderName: FPL_IndicationProvider. An unexpected error occurred in SetupNCTable(). Data field: return value from SetupNCTable(). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4946. WBEM ProviderName: FPL_IndicationProvider. Phase4BackToBackPrep() unexpectedly failed. Data field: return value of Phase4BackToBackPrep(). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4947. WBEM ProviderName: FPL_IndicationProvider. Unable to synch graphs between all cells in the partition after an OLA. Data field: (master cell number 56) | (bitmap of cells to synch). Probable Cause: An error occurred while routing the fabric Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4948. WBEM ProviderName: FPL_IndicationProvider. Data field: bitmap of unreachable cells. Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4949. WBEM ProviderName: FPL_IndicationProvider. An unexpected error occurred while setting up the Non-Coherent or Coherent tables after an OLA. Data field: return value from SetupNCTable() or SetupCohTable(). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4950. WBEM ProviderName: FPL_IndicationProvider. ArfRouteEnable() returned an unexpected error while enabling routes to the local cell. Data field: (local cell number 56) | (bitmap of routes to enable). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4951. WBEM ProviderName: FPL_IndicationProvider. ArfRouteDiable() returned an unexpected error while disabling routes during an OLA operation. Data field: (bitmap of cells 32) | (bitmap of routes to disable). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4952. WBEM ProviderName: FPL_IndicationProvider. ArfRouteDiable() returned an unexpected error while disabling routes in ArfPhase4. Data field: (bitmap of source cells 32) | (bitmap of routes to disable). Probable Cause: An error occurred while routing the fabric. Recommended Action: Collect IPMI event logs, and contact your HP support representative to inspect the fabric and system firmware. WBEM EventID: 4953. WBEM ProviderName: FPL_IndicationProvider. Memory allocation failed. The data is the size of the memory block which could not be allocated. Probable Cause: Memory could not be allocated for the guest. Recommended Action: Reduce memory usage by other programs, add physical memory, verify sufficient swap space, or configure the guest to use less memory. WBEM EventID: 4957. WBEM ProviderName: FPL_IndicationProvider. Platform Events 91