HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 71

Failed to reset the XBC Low Severity Error Log State. Probable Cause: Fabric Access

Get HP Integrity Superdome SX2000 PDF manuals and user guides View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Event ID Event Severity 9777 Warning 9778 Warning 9780 Warning 9781 Warning 9782 Warning 9783 Warning 9784 Warning 9785 Warning 9786 Warning 9787 Warning 9788 Warning 9789 Warning 9801 Error 9827 Warning Event Description The XBC CSR High Severity error was not cleared. Probable Cause: This could be caused by a fabric access error or persistent CSR Low Severity errors. Check Crossbar hardware, flex cables, backplane. WBEM EventID: 1830. WBEM ProviderName: FPL_IndicationProvider. Error encountered while reading the XBC Port Error Status Register. Probable Cause: Fabric Access Failure. Likely hardware problem. Look for additional chassis codes to further isolate the error. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 1831. WBEM ProviderName: FPL_IndicationProvider. Failed to read the XBC CSR Error Status register. Probable Cause: Fabric Access Failure. Likely hardware problem. Look for additional chassis codes to further isolate the error. WBEM EventID: 1832. WBEM ProviderName: FPL_IndicationProvider. Failed to copy the XBC CSR Error Symbol01 Block. Probable Cause: Fabric Access Failure; Possibly an invalid destination address. Check hardware, Contact HP Support. WBEM EventID: 1833. WBEM ProviderName: FPL_IndicationProvider. Failed to copy the XBC CSR Error Symbol23 Block. Probable Cause: Fabric Access Failure; Possibly an invalid destination address. Check hardware, Contact HP Support. WBEM EventID: 1834. WBEM ProviderName: FPL_IndicationProvider. Failed to reset the XBC Low Severity Error Log State. Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to check the XBC, Flex Cables, Backplane. WBEM EventID: 1835. WBEM ProviderName: FPL_IndicationProvider. Failed to clear the XBC Low Severity Log Symbol 01. Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to check the XBC, Backplane. WBEM EventID: 1836. WBEM ProviderName: FPL_IndicationProvider. Could not determine if there is a new XBC CSR Low Severity error. Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to check the XBC, Flex Cables, Backplane. WBEM EventID: 1837. WBEM ProviderName: FPL_IndicationProvider. Failed to read the XBC CSR Low Severity Error Log State. Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to check the XBC, Flex Cables, Backplane. WBEM EventID: 1838. WBEM ProviderName: FPL_IndicationProvider. Failed to reset the XBC Low Severity Error Log State. Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to check the XBC, Flex Cables, Backplane. WBEM EventID: 1839. WBEM ProviderName: FPL_IndicationProvider. Could not determine if there is a new XBC CSR High Severity error. Probable Cause: Check XBC, Flex Cables, Backplane Recommended Action: Contact HP Support personnel to check the XBC, Flex Cables, Backplane. WBEM EventID: 1840. WBEM ProviderName: FPL_IndicationProvider. Failed to read the XBC CSR High Severity Error Log State. Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to check the XBC, Flex Cables, Backplane. WBEM EventID: 1841. WBEM ProviderName: FPL_IndicationProvider. An error occurred while enabling hashing in the platform cache. Probable Cause: An error return status. This could happen if the tree was corrupted or there was an error verifying the hashing setting. Recommended Action: reset the partition. WBEM EventID: 1842. WBEM ProviderName: FPL_IndicationProvider. The XBC CSR is not a valid CSR address. Probable Cause: Invalid CSR address, possible firmware defect. Recommended Action: Capture complete live logs and contact HP Support representative. WBEM EventID: 1843. WBEM ProviderName: FPL_IndicationProvider. Platform Events 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Event Description
Event
Severity
Event ID
The XBC CSR High Severity error was not cleared. Probable Cause: This could be
caused by a fabric access error or persistent CSR Low Severity errors. Check Crossbar
hardware, flex cables, backplane. WBEM EventID: 1830. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9777
Error encountered while reading the XBC Port Error Status Register. Probable Cause:
Fabric Access Failure. Likely hardware problem. Look for additional chassis codes
to further isolate the error. Recommended Action: Contact HP Support personnel to
analyze the fabric. WBEM EventID: 1831. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9778
Failed to read the XBC CSR Error Status register. Probable Cause: Fabric Access
Failure. Likely hardware problem. Look for additional chassis codes to further isolate
the error. WBEM EventID: 1832. WBEM ProviderName: FPL_IndicationProvider.
Warning
9780
Failed to copy the XBC CSR Error Symbol01 Block. Probable Cause: Fabric Access
Failure; Possibly an invalid destination address. Check hardware, Contact HP Support.
WBEM EventID: 1833. WBEM ProviderName: FPL_IndicationProvider.
Warning
9781
Failed to copy the XBC CSR Error Symbol23 Block. Probable Cause: Fabric Access
Failure; Possibly an invalid destination address. Check hardware, Contact HP Support.
WBEM EventID: 1834. WBEM ProviderName: FPL_IndicationProvider.
Warning
9782
Failed to reset the XBC Low Severity Error Log State. Probable Cause: Fabric Access
Failure. Recommended Action: Contact HP Support personnel to check the XBC,
Flex Cables, Backplane. WBEM EventID: 1835. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9783
Failed to clear the XBC Low Severity Log Symbol 01. Probable Cause: Fabric Access
Failure. Recommended Action: Contact HP Support personnel to check the XBC,
Backplane. WBEM EventID: 1836. WBEM ProviderName: FPL_IndicationProvider.
Warning
9784
Could not determine if there is a new XBC CSR Low Severity error. Probable Cause:
Fabric Access Failure. Recommended Action: Contact HP Support personnel to check
the XBC, Flex Cables, Backplane. WBEM EventID: 1837. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9785
Failed to read the XBC CSR Low Severity Error Log State. Probable Cause: Fabric
Access Failure. Recommended Action: Contact HP Support personnel to check the
XBC, Flex Cables, Backplane. WBEM EventID: 1838. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9786
Failed to reset the XBC Low Severity Error Log State. Probable Cause: Fabric Access
Failure. Recommended Action: Contact HP Support personnel to check the XBC,
Flex Cables, Backplane. WBEM EventID: 1839. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9787
Could not determine if there is a new XBC CSR High Severity error. Probable Cause:
Check XBC, Flex Cables, Backplane Recommended Action: Contact HP Support
personnel to check the XBC, Flex Cables, Backplane. WBEM EventID: 1840. WBEM
ProviderName: FPL_IndicationProvider.
Warning
9788
Failed to read the XBC CSR High Severity Error Log State. Probable Cause: Fabric
Access Failure. Recommended Action: Contact HP Support personnel to check the
XBC, Flex Cables, Backplane. WBEM EventID: 1841. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9789
An error occurred while enabling hashing in the platform cache. Probable Cause: An
error return status. This could happen if the tree was corrupted or there was an error
verifying the hashing setting. Recommended Action: reset the partition. WBEM
EventID: 1842. WBEM ProviderName: FPL_IndicationProvider.
Error
9801
The XBC CSR is not a valid CSR address. Probable Cause: Invalid CSR address,
possible firmware defect. Recommended Action: Capture complete live logs and
contact HP Support representative. WBEM EventID: 1843. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9827
Platform Events
71