HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 63

Cell failed compatibility checks. Probable Cause: A Cell or CPU module's FRU data

Page 63 highlights

Event ID Event Severity 9388 Error 9389 Error 9390 Error 9391 Error 9392 Error 9394 Error 9403 Error 9412 Error 9417 Warning 9418 Warning 9419 Warning 9420 Warning 9428 Warning 9430 Error Event Description Cell failed compatibility checks. Probable Cause: A Cell or CPU module's FRU data is programmed incorrectly. Recommended Action: If this is in manufacturing, re-program the FRU specific field of the FRU data for the cell or CPU module. Otherwise, contact HP Support personnel to troubleshoot the problem. WBEM EventID: 923. WBEM ProviderName: FPL_IndicationProvider. PDH space not available after release from reset. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 924. WBEM ProviderName: FPL_IndicationProvider. MPON failed to release. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 925. WBEM ProviderName: FPL_IndicationProvider. Dillon failed to reset. Probable Cause: Hardware failure. Recommended Action: Fix the hardware, pdh riser or cell. WBEM EventID: 926. WBEM ProviderName: FPL_IndicationProvider. DMD clock is not running. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 927. WBEM ProviderName: FPL_IndicationProvider. All cpus on the Cell are scheduled to be deconfigured. Probable Cause: All cpus on the cell have been scheduled for deconfiguration. On the next reset, the cell will no longer be operational; system firmware will deconfigure all the cpus and this cell will not be part of a partition. This action is not recommended. To recover, the NVRAM on the PDH card must be cleared, the cell power cycled, and defaults restored from disk. WBEM EventID: 928. WBEM ProviderName: FPL_IndicationProvider. A read error occurred while dumping the routing registers. Probable Cause: Fabric Read Error. Recommended Action: Check XBC, CC, links, etc. WBEM EventID: 929. WBEM ProviderName: FPL_IndicationProvider. Failed to disable the CC to CC link. Probable Cause: Failure to read or write CC CSRs. Recommended Action: Contact HP Support personnel to check the Check CC. WBEM EventID: 930. WBEM ProviderName: FPL_IndicationProvider. Power has been removed from AC input A0. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 931. WBEM ProviderName: FPL_IndicationProvider. Power has been removed from AC input A1. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 932. WBEM ProviderName: FPL_IndicationProvider. Power has been removed from AC input B0. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 933. WBEM ProviderName: FPL_IndicationProvider. Power has been removed from AC input B1. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 934. WBEM ProviderName: FPL_IndicationProvider. Failed to disable the XIN link during a failed link init. Probable Cause: Have your HP Support Representative check the Coherency Controller. WBEM EventID: 935. WBEM ProviderName: FPL_IndicationProvider. Error copying the routing registers to the local port. Probable Cause: XBC access failure. Recommended Action: Check XBC, check links, check backplane, check CC. WBEM EventID: 1765. WBEM ProviderName: FPL_IndicationProvider. Platform Events 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

Event Description
Event
Severity
Event ID
Cell failed compatibility checks. Probable Cause: A Cell or CPU module's FRU data
is programmed incorrectly. Recommended Action: If this is in manufacturing,
re-program the FRU specific field of the FRU data for the cell or CPU module.
Otherwise, contact HP Support personnel to troubleshoot the problem. WBEM
EventID: 923. WBEM ProviderName: FPL_IndicationProvider.
Error
9388
PDH space not available after release from reset. Probable Cause: A hardware fault
has occurred. Recommended Action: Contact HP Support personnel to troubleshoot
the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 924.
WBEM ProviderName: FPL_IndicationProvider.
Error
9389
MPON failed to release. Probable Cause: A hardware fault has occurred.
Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board,
Cell Power Board and PDH Daughtercard. WBEM EventID: 925. WBEM
ProviderName: FPL_IndicationProvider.
Error
9390
Dillon failed to reset. Probable Cause: Hardware failure. Recommended Action: Fix
the hardware, pdh riser or cell. WBEM EventID: 926. WBEM ProviderName:
FPL_IndicationProvider.
Error
9391
DMD clock is not running. Probable Cause: A hardware fault has occurred.
Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board,
Cell Power Board and PDH Daughtercard. WBEM EventID: 927. WBEM
ProviderName: FPL_IndicationProvider.
Error
9392
All cpus on the Cell are scheduled to be deconfigured. Probable Cause: All cpus on
the cell have been scheduled for deconfiguration. On the next reset, the cell will no
longer be operational; system firmware will deconfigure all the cpus and this cell
will not be part of a partition. This action is not recommended. To recover, the
NVRAM on the PDH card must be cleared, the cell power cycled, and defaults
restored from disk. WBEM EventID: 928. WBEM ProviderName:
FPL_IndicationProvider.
Error
9394
A read error occurred while dumping the routing registers. Probable Cause: Fabric
Read Error. Recommended Action: Check XBC, CC, links, etc. WBEM EventID: 929.
WBEM ProviderName: FPL_IndicationProvider.
Error
9403
Failed to disable the CC to CC link. Probable Cause: Failure to read or write CC CSRs.
Recommended Action: Contact HP Support personnel to check the Check CC. WBEM
EventID: 930. WBEM ProviderName: FPL_IndicationProvider.
Error
9412
Power has been removed from AC input A0. Probable Cause: A power source has
been removed from the chassis. WBEM EventID: 931. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9417
Power has been removed from AC input A1. Probable Cause: A power source has
been removed from the chassis. WBEM EventID: 932. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9418
Power has been removed from AC input B0. Probable Cause: A power source has
been removed from the chassis. WBEM EventID: 933. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9419
Power has been removed from AC input B1. Probable Cause: A power source has
been removed from the chassis. WBEM EventID: 934. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9420
Failed to disable the XIN link during a failed link init. Probable Cause: Have your
HP Support Representative check the Coherency Controller. WBEM EventID: 935.
WBEM ProviderName: FPL_IndicationProvider.
Warning
9428
Error copying the routing registers to the local port. Probable Cause: XBC access
failure. Recommended Action: Check XBC, check links, check backplane, check CC.
WBEM EventID: 1765. WBEM ProviderName: FPL_IndicationProvider.
Error
9430
Platform Events
63