HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 53

An error was encountered initializing the PCI IO map. Probable Cause: The PCI

Get HP Integrity Superdome SX2000 PDF manuals and user guides View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Event ID Event Severity 8676 Error 8677 Error 8679 Error 8690 Warning 8691 Error 8692 Warning 8693 Warning 8694 Warning 8709 Error 8710 Error 8711 Error 8712 Warning 8713 Warning Event Description Error writing the XIN init disable register. Probable Cause: Check XBC, CC, backplane. WBEM EventID: 771. WBEM ProviderName: FPL_IndicationProvider. Error reading the XIN init state register. Probable Cause: Check XBC, CC, backplane. WBEM EventID: 772. WBEM ProviderName: FPL_IndicationProvider. intermittent failure while retrying the CC to XBC link init. Probable Cause: contact your HP service representative. WBEM EventID: 773. WBEM ProviderName: FPL_IndicationProvider. Initialization of a PCI node in the firmware device tree failed. Probable Cause: The PCI component could not create a device tree node. Recommended Action: This is an internal system firmware error. Update system firmware or contact a system firmware representative. WBEM EventID: 774. WBEM ProviderName: FPL_IndicationProvider. An error was encountered while scanning the PCI bus. Probable Cause: The PCI component experienced an internal system firmware error while scanning the PCI bus. Recommended Action: This is an internal system firmware error. Update system firmware or contact a system firmware representative. WBEM EventID: 775. WBEM ProviderName: FPL_IndicationProvider. An error was encountered initializing the PCI bridge. Probable Cause: The PCI component could not initialize a P2P bridge registers, probably due to faulty hardware. Recommended Action: Reseat or replace the PCI bridge card. WBEM EventID: 776. WBEM ProviderName: FPL_IndicationProvider. An error was encountered initializing the PCI IO map. Probable Cause: The PCI component had insufficient IO port space resources to support the installed PCI cards. Recommended Action: Remove one or more PCI cards to reduce resource requirements; check for faulty cards that are requesting more resources than they need. WBEM EventID: 777. WBEM ProviderName: FPL_IndicationProvider. An error was encountered creating the PCI MMIO map. Probable Cause: The PCI component had insufficient MMIO space to support the installed cards. Recommended Action: Remove one or more PCI cards to reduce the MMIO requirements; check for a PCI card requesting more MMIO resources than it needs. WBEM EventID: 778. WBEM ProviderName: FPL_IndicationProvider. There was an error initializing the SBA node. Probable Cause: An error was while initializing the SBA firmware structures Recommended Action: Correct any previous errors Invalidate NVM and reset replace the cell board. WBEM EventID: 779. WBEM ProviderName: FPL_IndicationProvider. There was an error discovering the SBA. Probable Cause: An error was discovered with the SBA during discovery Recommended Action: Correct any previous errors Replace the I/O backplane. WBEM EventID: 780. WBEM ProviderName: FPL_IndicationProvider. An error was encountered while resetting the SBA. Probable Cause: The SBA component could not reset one or more LBA ropes, probably due to faulty hardware. Recommended Action: Replace the failed IO backplane. WBEM EventID: 781. WBEM ProviderName: FPL_IndicationProvider. There was an error initializing the IO link. Probable Cause: The SBA IO link could not be initialized, probably due to cable installation errors or faulty hardware. Recommended Action: Re-install or replace the cables; replace the IO backplane. WBEM EventID: 782. WBEM ProviderName: FPL_IndicationProvider. There is a problem initializing the REO cable. Probable Cause: An SBA IO cable error has been detected. Recommended Action: Verify proper cable connection, repair/replace the cables. WBEM EventID: 783. WBEM ProviderName: FPL_IndicationProvider. Platform Events 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Event Description
Event
Severity
Event ID
Error writing the XIN init disable register. Probable Cause: Check XBC, CC, backplane.
WBEM EventID: 771. WBEM ProviderName: FPL_IndicationProvider.
Error
8676
Error reading the XIN init state register. Probable Cause: Check XBC, CC, backplane.
WBEM EventID: 772. WBEM ProviderName: FPL_IndicationProvider.
Error
8677
intermittent failure while retrying the CC to XBC link init. Probable Cause: contact
your HP service representative. WBEM EventID: 773. WBEM ProviderName:
FPL_IndicationProvider.
Error
8679
Initialization of a PCI node in the firmware device tree failed. Probable Cause: The
PCI component could not create a device tree node. Recommended Action: This is
an internal system firmware error. Update system firmware or contact a system
firmware representative. WBEM EventID: 774. WBEM ProviderName:
FPL_IndicationProvider.
Warning
8690
An error was encountered while scanning the PCI bus. Probable Cause: The PCI
component experienced an internal system firmware error while scanning the PCI
bus. Recommended Action: This is an internal system firmware error. Update system
firmware or contact a system firmware representative. WBEM EventID: 775. WBEM
ProviderName: FPL_IndicationProvider.
Error
8691
An error was encountered initializing the PCI bridge. Probable Cause: The PCI
component could not initialize a P2P bridge registers, probably due to faulty
hardware. Recommended Action: Reseat or replace the PCI bridge card. WBEM
EventID: 776. WBEM ProviderName: FPL_IndicationProvider.
Warning
8692
An error was encountered initializing the PCI IO map. Probable Cause: The PCI
component had insufficient IO port space resources to support the installed PCI
cards. Recommended Action: Remove one or more PCI cards to reduce resource
requirements; check for faulty cards that are requesting more resources than they
need. WBEM EventID: 777. WBEM ProviderName: FPL_IndicationProvider.
Warning
8693
An error was encountered creating the PCI MMIO map. Probable Cause: The PCI
component had insufficient MMIO space to support the installed cards. Recommended
Action: Remove one or more PCI cards to reduce the MMIO requirements; check for
a PCI card requesting more MMIO resources than it needs. WBEM EventID: 778.
WBEM ProviderName: FPL_IndicationProvider.
Warning
8694
There was an error initializing the SBA node. Probable Cause: An error was while
initializing the SBA firmware structures Recommended Action: Correct any previous
errors Invalidate NVM and reset replace the cell board. WBEM EventID: 779. WBEM
ProviderName: FPL_IndicationProvider.
Error
8709
There was an error discovering the SBA. Probable Cause: An error was discovered
with the SBA during discovery Recommended Action: Correct any previous errors
Replace the I/O backplane. WBEM EventID: 780. WBEM ProviderName:
FPL_IndicationProvider.
Error
8710
An error was encountered while resetting the SBA. Probable Cause: The SBA
component could not reset one or more LBA ropes, probably due to faulty hardware.
Recommended Action: Replace the failed IO backplane. WBEM EventID: 781. WBEM
ProviderName: FPL_IndicationProvider.
Error
8711
There was an error initializing the IO link. Probable Cause: The SBA IO link could
not be initialized, probably due to cable installation errors or faulty hardware.
Recommended Action: Re-install or replace the cables; replace the IO backplane.
WBEM EventID: 782. WBEM ProviderName: FPL_IndicationProvider.
Warning
8712
There is a problem initializing the REO cable. Probable Cause: An SBA IO cable error
has been detected. Recommended Action: Verify proper cable connection,
repair/replace the cables. WBEM EventID: 783. WBEM ProviderName:
FPL_IndicationProvider.
Warning
8713
Platform Events
53