HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 84
been detected in the Instruction or Data Cache Memory I-Cache or D-Cache.
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Event ID Event Severity 10794 Error 10795 Error 10814 Warning 10822 Warning 10823 Warning 10824 Warning 10825 Warning 10826 Warning 10827 Warning Event Description Data field is count of cpus held by the sm4 which issues the event (and is trying to reset itself). Indicates invocation of the SoftResetCpu code from an interrupt or similar vector. Probable Cause: An error in the system firmware. Recommended Action: Reset the nPar. WBEM EventID: 4697. WBEM ProviderName: FPL_IndicationProvider. A reset of an fPar discovered that an fPar failed to release critical resources within a reasonable time. Probable Cause: Fpar reset to an Fpar which failed to release critical resources within a reasonable time. Recommended Action: No action is required. The nPar will be rebooted. WBEM EventID: 4698. WBEM ProviderName: FPL_IndicationProvider. Significant numbers of corrected memory errors have been detected on the memory subsystem. Probable Cause: You will receive this message if the system is observing a lot of corrected ECC errors in memory. This could be caused by problems with the system's memory or by unexpected environmental conditions inside the server. Recommended Action: Contact your HP support representative to check your memory system. WBEM EventID: 4542. WBEM ProviderName: FPL_IndicationProvider. Over-temperature condition detected on a processor. Probable Cause: The processor temperature is above the operating range. The processor's performance is throttled by the firmware to reduce the temperature Recommended Action: The firmware has already taken necessary action. Once the temperature comes down, the firmware will restore the processor's performance to normal. WBEM EventID: 4543. WBEM ProviderName: FPL_IndicationProvider. Cache errors detected on a processor. Probable Cause: Threshold parity errors have been detected in the Instruction or Data Cache Memory (I-Cache or D-Cache). The operating system has recovered from the errors, but this is an abnormally high failure rate Recommended Action: Contact your HP support representative to check the processor. WBEM EventID: 4544. WBEM ProviderName: FPL_IndicationProvider. Corrected errors detected in the cache portion of the memory for a processor module. Probable Cause: Threshold corrected platform errors have been detected in the cache portion of the memory for the processor module. The operating system has recovered from the errors, but this is an abnormally high failure rate Recommended Action: Contact your HP support representative to check the processor. WBEM EventID: 4545. WBEM ProviderName: FPL_IndicationProvider. Corrected errors detected on the system bus for a processor module. Probable Cause: Threshold corrected platform errors have been detected on the system bus for the processor module. The operating system has recovered from the errors, but this is an abnormally high failure rate Recommended Action: Contact your HP support representative to check the processor module or the system bus for the processor if an excessive number of these errors are generated. WBEM EventID: 4546. WBEM ProviderName: FPL_IndicationProvider. Corrected errors detected on the processor bus for a processor module. Probable Cause: Threshold corrected platform errors have been detected on the processor bus for the processor module. The operating system has recovered from the errors, but this is an abnormally high failure rate Recommended Action: Contact your HP support representative to check the processor module or the system bus for the processor if an excessive number of these errors are generated. WBEM EventID: 4547. WBEM ProviderName: FPL_IndicationProvider. Corrected errors detected in the tag portion of the memory for a processor module. Probable Cause: Threshold corrected platform errors have been detected in the tag portion of the memory for the processor module. The operating system has recovered from the errors, but this is an abnormally high failure rate. Recommended Action: Contact your HP support representative to check the processor module if an excessive number of these errors are generated. WBEM EventID: 4548. WBEM ProviderName: FPL_IndicationProvider. 84 WBEM Provider Event Tables