Kyocera KM-C2030 FieryX3e+ User Software Install Guide - Page 63
Software CD., is the printing connection.
View all Kyocera KM-C2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
11-47 Setting up PostScript or PCL printing with Windows 2000/XP If you are not able to locate your Fiery X3e, contact your network administrator. 3. Double-click the name of the Fiery X3e to display enabled print connections. You must now create a printer port and install the printer driver from the User Software CD. NOTE: You cannot use Point and Print to install the driver and configure the printing connection to the Fiery X3e in a single procedure. 4. On Windows 2000, click Start, choose Settings, and then choose Printers. On Windows XP, click Start and choose Printers and Faxes. 5. Double-click Add Printer and click Next. 6. Click Local Printer and click Next. 7. Click Create a New Port, and choose Local Port from the menu. Click Next. 8. In the Port Name dialog box, type the name of the Fiery X3e, followed by the printing connection, and click OK. Enter the port name as follows: \\Aero\print where Aero is the name of the Fiery X3e and print is the printing connection. 9. In the dialog box displaying lists of manufacturers and printers, click Have Disk. You will now install the printer driver from the User Software CD. 10. Type the name of the CD-ROM drive and browse to the English\Prntdrvr\Ps_drvr\Win_2000 or English\Prntdrvr\Ps_drvr\Win_XP folder. 11. Make sure "Oemsetup.inf" or "Oemsetup" is selected and click Open. 12. Verify the path is correct in the Install From Disk dialog box and click OK. 13. Follow the on-screen instructions. For more information, see "To install the PostScript or PCL printer driver for Windows 2000/XP" on page 1-33.