Lexmark T652 Service Manual - Page 102

4062 Error code or message 260.02 Error contents Description/Action Possible repair actions Envelope feeder assembly error Mechanical feed error or timing error. 1. Remove the envelope feeder. 2. Remove all media present in media path. 3. Check media for proper installation. 4. Check for obstructions in media path. 5. Ensure the envelope feeder assembly is properly installed. 6. Check all connections on the envelope feeder assembly. 7. Replace the envelope feeder assembly if problem remains. 1. Remove the envelope feeder. 2. Remove all media present in media path. 3. Check for obstructions in media path. 4. Ensure the envelope feeder assembly is properly installed. 5. Check all connections on the envelope feeder assembly. 6. Replace the envelope feeder assembly if problem remains. 1. Remove the envelope feeder. 2. Remove all media present in media path. 3. Ensure envelope feeder is not overfilled. 4. Check, clean or replace the envelope feeder pick roll for wear and excess contamination. 5. Check all connections on the envelope feeder. 6. Check all connections on the system card assembly. 7. Replace the envelope feeder assembly if problem remains. 8. Replace system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 260.05 Sensor (envelope feeder pass through) lingering jam Source = Envelope feeder The media reached the sensor (envelope feeder pass through) but did not clear it in the specified time. 260.06 Sensor (envelope feeder pass through) late jam Source = Envelope feeder The media is late reaching the sensor (envelope feeder pass through) within the specified time. 2-68 Service Manual