Lexmark T652 Service Manual - Page 80

4062 Error code or message 242.18 Error contents Description/Action Possible repair actions Pick retry timeout Source = Tray 2 The engine timed out waiting for the tray 2 to report ready before the first pick attempt. The engine timed out waiting for the tray 2 to report ready before a pick retry attempt. The Pick motor encoder continues to detect pulses after the motor was turned off. Turn the machine off/on. 242.19 Pick retry timeout Source = Tray 2 Turn the machine off/on. 242.52 Tray 2 pick motor overrun failure Source = Tray 2 1. Check all connections on the pick arm assembly. 2. Check all connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Operator panel door assembly removal (models X651, X652, X654, and X656)" on page 4-49. 1. Check the size sensing fingers on the media tray for damage 2. Replace the media tray assembly if problem remains. 3. Check the switch (media size) for proper connection. 4. Replace the switch (media size) if problem remains. Go to "Switch (media size) assembly removal (T650, T652, T654)" on page 4-74. 1. Check the media out actuator for damage. 2. Replace the media out actuator if problem remains. Go to "Tray roller catch assembly removal (T650, T652, T654)" on page 4-81. Go to sensor (pass through) static jam service check. See "Sensor (pass through) static jam service check" on page 2-147. Go to sensor (pass through) static jam service check. See "Sensor (pass through) static jam service check" on page 2-147. Go to sensor (pass through) late jam service check. See "Sensor (pass through) late jam service check" on page 2-145. 242.33 Tray 2 not ready Source = Tray 2 Tray was not properly pushed into the machine. 242.34 Empty tray pick attempted Source = Tray 2 The pick arm attempted to pick with no media in the tray. 242.35 Pick page received while POR not yet done. Source = Tray 2 Media remains on the sensor (input) during the warm up sequence. 242.36 Sensor (pass through) static jam Source = Tray 2 Media remains on the sensor (input) during the warm up sequence. 242.37 Sensor (pass through) late jam Source = Tray 2 The media is late reaching the sensor (pass through) within the specified time. 2-46 Service Manual